Hey guys, many of you have had issues with WiFi on your Phat. A few months ago, long term supporter, @Reo_Auin and I set out to try and fix this. Devs from KHEOPS team including @saya and other members like farofr and many other Discord members also tried to help out by providing debug logs from affected systems. We weren't successful. Now, he brought attention to a custom driver. We will be trying that out in hopes of a fix. Check if you have an affected system If you have a Phat/Pro with no WiFi and you don't have an MT7668 (check here , chances are you have an affected system. To confirm, Get the sflash by FTPing into /dev See if the WiFi version says Torus 2.0 by reading the sflash with PS4 Wee Tools . Or, send me the file so, I can check it. If your PS4 is one of the affected ones, you can take part in the testing and provide logs. Instructions for the same are give below:- Test 1 Install an Ubuntu-based distro on PS4 . Download driver+kernel package and extract it. Reboot with bzImage in the extracted folder. Use any initram of your choice. Go to the extracted folder, open a terminal, type sudo dpkg -i *.deb and press Enter. On the terminal, type sudo insmod mwlwifi.ko Result and steps to follow:- | Errors pop up -> Screenshot and paste it here. | No errors and no Wi-Fi -> On a terminal, type dmesg > dmesg.txt . This will produce a text file called dmesg.txt in the corresponding folder. Paste the contents of the txt file on the forum here enclosed in `. Test 2 Some users say WiFi connects and suddenly disconnects for them, with this chipset. For them, follow these (can be done on any distro):- As soon as you boot up, on a terminal, type dmesg > dmesg1.txt . Connect to WiFi. As soon as it disconnects, type dmesg > dmesg2.txt . This will produce 2 text files called dmesg1.txt and dmesg2.txt in the corresponding folder. Paste the contents of the txt file on the forum here enclosed in `.

Hello there, Just tried this out and it did not work for me.......i may have issues with my distro as i am using ubuntu 21.10 by ITmania.......when i get the chance i will update to a newer/more recent version... i had some errors when updating the kernel..... [ 0.000000] ps4: x86_ps4_early_setup: PS4 early setup [ 0.000000] Linux version 5.15.15 (noob@noob) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Mon Jun 10 18:54:03 IST 2024 [ 0.000000] Command line: drm.edid_firmware=edid/1920x1080.bin panic=0 clocksource=tsc root=LABEL=gentoo rootdelay=6 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.1 present. [ 0.000000] DMI: , BIOS unde Mon 01/15/2018 5:2 [ 0.000000] ps4: Unable to measure TSC frequency, assuming default. [ 0.000000] tsc: Detected 1594.000 MHz processor [ 0.001133] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001139] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001152] last_pfn = 0x27f000 max_arch_pfn = 0x400000000 [ 0.001435] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001808] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved [ 0.001826] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.009845] Using GB pages for direct mapping [ 0.011215] RAMDISK: [mem 0x37800000-0x37be9fff] [ 0.011227] ACPI: Early table checksum verification disabled [ 0.011234] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE ) [ 0.011243] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE ORBIS 20121218 INTL 20110211) [ 0.011256] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE ORBIS 20130205 INTL 20110211) [ 0.011269] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE ORBIS 20121002 INTL 20110211) [ 0.011278] ACPI: FACS 0x00000000000E012C 000040 [ 0.011284] ACPI: FACS 0x00000000000E012C 000040 [ 0.011291] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE ORBIS 20120725 INTL 20110211) [ 0.011299] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE ORBIS 20120725 INTL 20110211) [ 0.011307] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.011315] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F PS4KEXEC 20161225 KEXC 20161225) [ 0.011322] ACPI: Reserving FACP table memory at [mem 0xe016c-0xe025f] [ 0.011326] ACPI: Reserving DSDT table memory at [mem 0xe0430-0xe05bb] [ 0.011329] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b] [ 0.011332] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b] [ 0.011335] ACPI: Reserving APIC table memory at [mem 0xe0298-0xe0303] [ 0.011338] ACPI: Reserving MCFG table memory at [mem 0xe0304-0xe033f] [ 0.011340] ACPI: Reserving SSDT table memory at [mem 0xe0730-0xe2073] [ 0.011343] ACPI: Reserving IVRS table memory at [mem 0xe2074-0xe20c7] [ 0.011412] No NUMA configuration found [ 0.011415] Faking a node at [mem 0x0000000000000000-0x000000027effffff] [ 0.011424] NODE_DATA(0) allocated [mem 0x27effa000-0x27effdfff] [ 0.011463] Zone ranges: [ 0.011466] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011471] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011476] Normal [mem 0x0000000100000000-0x000000027effffff] [ 0.011480] Movable zone start for each node [ 0.011483] Early memory node ranges [ 0.011485] node 0: [mem 0x0000000000001000-0x0000000000007fff] [ 0.011489] node 0: [mem 0x0000000000080000-0x0000000000099fff] [ 0.011493] node 0: [mem 0x0000000000100000-0x00000000003fffff] [ 0.011496] node 0: [mem 0x0000000000480000-0x000000000067ffff] [ 0.011499] node 0: [mem 0x0000000000700000-0x000000007efe7fff] [ 0.011502] node 0: [mem 0x000000007f000000-0x000000007fffffff] [ 0.011506] node 0: [mem 0x0000000140000000-0x000000027effffff] [ 0.011510] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] [ 0.011518] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.011525] On node 0, zone DMA: 120 pages in unavailable ranges [ 0.011543] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.011557] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.011597] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.019387] On node 0, zone DMA32: 24 pages in unavailable ranges [ 0.039128] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.039824] ACPI: No IOAPIC entries present [ 0.039828] ACPI: Using ACPI for processor (LAPIC) configuration information [ 0.039833] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.039868] [mem 0xfc000000-0xffffffff] available for PCI devices [ 0.039875] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.051567] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.052190] percpu: Embedded 39 pages/cpu s120600 r8192 d30952 u262144 [ 0.052216] pcpu-alloc: s120600 r8192 d30952 u262144 alloc=1*2097152 [ 0.052223] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.052271] Built 1 zonelists, mobility grouping on. Total pages: 1801775 [ 0.052276] Policy zone: Normal [ 0.052281] Kernel command line: drm.edid_firmware=edid/1920x1080.bin panic=0 clocksource=tsc root=LABEL=gentoo rootdelay=6 [ 0.052337] printk: log_buf_len individual max cpu contribution: 65536 bytes [ 0.052341] printk: log_buf_len total cpu_extra contributions: 458752 bytes [ 0.052343] printk: log_buf_len min size: 65536 bytes [ 0.053186] printk: log_buf_len: 524288 bytes [ 0.053195] printk: early log buf free: 58904(89%) [ 0.054934] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.055822] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.055894] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.124909] Memory: 7089584K/7321636K available (16387K kernel code, 899K rwdata, 4772K rodata, 936K init, 556K bss, 231796K reserved, 0K cma-reserved) [ 0.125027] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.125150] rcu: Hierarchical RCU implementation. [ 0.125155] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.125170] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0 [ 0.125306] __common_interrupt: 0.49 No irq handler for vector [ 0.125336] Console: colour dummy device 80x25 [ 0.125684] printk: console [tty0] enabled [ 0.125724] ACPI: Core revision 20210730 [ 0.125800] ACPI: setting ELCR to 0200 (from ffff) [ 0.125820] Failed to register legacy timer interrupt [ 0.125825] APIC: Switch to symmetric I/O mode setup [ 0.150903] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x16fa00e7d19, max_idle_ns: 440795227561 ns [ 0.150925] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.00 BogoMIPS (lpj=1594000) [ 0.150936] pid_max: default: 32768 minimum: 301 [ 0.151022] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.151062] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.151474] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.151482] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.151493] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.151501] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ 0.151505] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.151917] Freeing SMP alternatives memory: 40K [ 0.151917] smpboot: CPU0: AMD DG1101SKF84HV (family: 0x16, model: 0x13, stepping: 0x1) [ 0.151917] Performance Events: AMD PMU driver. [ 0.151917] ... version: 0 [ 0.151917] ... bit width: 48 [ 0.151917] ... generic registers: 4 [ 0.151917] ... value mask: 0000ffffffffffff [ 0.151917] ... max period: 00007fffffffffff [ 0.151917] ... fixed-purpose events: 0 [ 0.151917] ... event mask: 000000000000000f [ 0.151917] rcu: Hierarchical SRCU implementation. [ 0.151917] smp: Bringing up secondary CPUs ... [ 0.151917] x86: Booting SMP configuration: [ 0.151917] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.161014] smp: Brought up 1 node, 8 CPUs [ 0.161033] smpboot: Max logical packages: 1 [ 0.161039] smpboot: Total of 8 processors activated (25504.00 BogoMIPS) [ 0.163118] devtmpfs: initialized [ 0.163118] random: get_random_u32 called from 0xffffffff8146fe0f with crng_init=0 [ 0.163118] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.163118] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.163118] prandom: seed boundary self test passed [ 0.164962] prandom: 100 self tests passed [ 0.169634] prandom32: self test passed (less than 6 bits correlated) [ 0.169731] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.169798] audit: initializing netlink subsys (disabled) [ 0.169815] audit: type=2000 audit(0.018:1): state=initialized audit_enabled=0 res=1 [ 0.170045] i2c-core: driver [dummy] registered [ 0.170051] thermal_sys: Registered thermal governor 'step_wise' [ 0.170080] cpuidle: using governor ladder [ 0.170080] cpuidle: using governor menu [ 0.170080] ACPI: bus type PCI registered [ 0.170080] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.170080] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.170080] PCI: Using configuration type 1 for base access [ 0.178068] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.178945] cryptd: max_cpu_qlen set to 1000 [ 0.180002] ACPI: Added _OSI(Module Device) [ 0.180010] ACPI: Added _OSI(Processor Device) [ 0.180016] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180021] ACPI: Added _OSI(Processor Aggregator Device) [ 0.180027] ACPI: Added _OSI(Linux-Dell-Video) [ 0.180033] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.180039] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.182664] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.182989] ACPI: OSL: SCI (IRQ9) allocation failed [ 0.182997] ACPI Error: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20210730/evevent-96) [ 0.183009] ACPI: Unable to start the ACPI Interpreter [ 0.183015] ACPI Error: Could not remove SCI handler (20210730/evmisc-251) [ 0.183294] iommu: Default domain type: Passthrough [ 0.183321] vgaarb: loaded [ 0.183321] SCSI subsystem initialized [ 0.183321] libata version 3.00 loaded. [ 0.183321] usbcore: registered new interface driver usbfs [ 0.183321] usbcore: registered new interface driver hub [ 0.183321] usbcore: registered new device driver usb [ 0.183335] Advanced Linux Sound Architecture Driver Initialized. [ 0.184022] Bluetooth: Core ver 2.22 [ 0.184041] NET: Registered PF_BLUETOOTH protocol family [ 0.184047] Bluetooth: HCI device and connection manager initialized [ 0.184055] Bluetooth: HCI socket layer initialized [ 0.184062] Bluetooth: L2CAP socket layer initialized [ 0.184069] Bluetooth: SCO socket layer initialized [ 0.184103] PCI: Probing PCI hardware [ 0.184103] PCI: root bus 00: using default resources [ 0.184103] PCI: Probing PCI hardware (bus 00) [ 0.184103] PCI host bridge to bus 0000:00 [ 0.184103] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.184103] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.184103] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.184103] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000 [ 0.184120] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600 [ 0.184226] pci 0000:00:01.0: [1002:9922] type 00 class 0x030000 [ 0.184244] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.184260] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref] [ 0.184273] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff] [ 0.184284] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff] [ 0.184294] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.184306] pci 0000:00:01.0: enabling Extended Tags [ 0.184335] pci 0000:00:01.0: supports D1 D2 [ 0.184342] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.184398] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.184406] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.184435] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300 [ 0.184452] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit] [ 0.184479] pci 0000:00:01.1: enabling Extended Tags [ 0.184504] pci 0000:00:01.1: supports D1 D2 [ 0.184577] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000 [ 0.184674] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000 [ 0.184697] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit] [ 0.184711] pci 0000:00:14.0: reg 0x18: [io 0x1000-0x10ff] [ 0.184950] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.184998] pci 0000:00:14.0: supports D1 [ 0.185005] pci 0000:00:14.0: PME# supported from D0 D1 D3hot [ 0.185101] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001 [ 0.185123] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit] [ 0.185157] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185200] pci 0000:00:14.1: supports D1 [ 0.185207] pci 0000:00:14.1: PME# supported from D0 D1 D3hot [ 0.185295] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002 [ 0.185316] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit] [ 0.185345] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff] [ 0.185358] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185401] pci 0000:00:14.2: supports D1 [ 0.185407] pci 0000:00:14.2: PME# supported from D0 D1 D3hot [ 0.185494] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003 [ 0.185515] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit] [ 0.185549] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref] [ 0.185592] pci 0000:00:14.3: supports D1 [ 0.185598] pci 0000:00:14.3: PME# supported from D0 D1 D3hot [ 0.185685] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004 [ 0.185707] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit] [ 0.185723] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit] [ 0.185739] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit] [ 0.185752] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185795] pci 0000:00:14.4: supports D1 [ 0.185801] pci 0000:00:14.4: PME# supported from D0 D1 D3hot [ 0.185888] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005 [ 0.185909] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit] [ 0.185933] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit] [ 0.185957] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.186000] pci 0000:00:14.5: supports D1 [ 0.186006] pci 0000:00:14.5: PME# supported from D0 D1 D3hot [ 0.186095] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006 [ 0.186116] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit] [ 0.186133] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit] [ 0.186146] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff] [ 0.186159] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff] [ 0.186172] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.186214] pci 0000:00:14.6: supports D1 [ 0.186220] pci 0000:00:14.6: PME# supported from D0 D1 D3hot [ 0.186308] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007 [ 0.186330] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 0.186346] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit] [ 0.186362] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit] [ 0.186375] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.186418] pci 0000:00:14.7: supports D1 [ 0.186424] pci 0000:00:14.7: PME# supported from D0 D1 D3hot [ 0.186506] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000 [ 0.186583] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000 [ 0.186657] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000 [ 0.186728] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000 [ 0.186806] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000 [ 0.186881] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000 [ 0.186964] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.188444] PCI: pci_cache_line_size set to 64 bytes [ 0.188481] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff] [ 0.188486] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.188489] e820: reserve RAM buffer [mem 0x00680000-0x006fffff] [ 0.188492] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff] [ 0.188495] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] [ 0.188658] clocksource: Switched to clocksource tsc-early [ 0.188805] pnp: PnP ACPI: disabled [ 0.190778] NET: Registered PF_INET protocol family [ 0.191064] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.193176] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.193239] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.193476] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.193761] TCP: Hash tables configured (established 65536 bind 65536) [ 0.193852] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.193905] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.194028] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.194352] RPC: Registered named UNIX socket transport module. [ 0.194360] RPC: Registered udp transport module. [ 0.194365] RPC: Registered tcp transport module. [ 0.194369] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.194676] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref] [ 0.194693] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref] [ 0.194704] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref] [ 0.194715] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref] [ 0.194725] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref] [ 0.194735] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref] [ 0.194745] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref] [ 0.194755] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref] [ 0.194766] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref] [ 0.194781] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.194790] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.194817] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.194863] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 0.194876] pci 0000:00:02.0: CLS mismatch (64 != 512), using 64 bytes [ 0.194976] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq [ 0.195059] pci 0000:00:14.0: Adding to iommu group 0 [ 0.195084] pci 0000:00:14.1: Adding to iommu group 0 [ 0.195106] pci 0000:00:14.2: Adding to iommu group 0 [ 0.195120] Trying to unpack rootfs image as initramfs... [ 0.195128] pci 0000:00:14.3: Adding to iommu group 0 [ 0.195150] pci 0000:00:14.4: Adding to iommu group 0 [ 0.195173] pci 0000:00:14.5: Adding to iommu group 0 [ 0.195204] pci 0000:00:14.6: Adding to iommu group 0 [ 0.195227] pci 0000:00:14.7: Adding to iommu group 0 [ 0.195269] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.195276] AMD-Vi: Extended features (0x840): IA [ 0.195285] AMD-Vi: Interrupt remapping enabled [ 0.195413] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.195420] software IO TLB: mapped [mem 0x000000007afe8000-0x000000007efe8000] (64MB) [ 0.195485] LVT offset 0 assigned for vector 0x400 [ 0.204192] perf: AMD IBS detected (0x000000ff) [ 0.204498] kvm: Nested Virtualization enabled [ 0.204505] SVM: kvm: Nested Paging enabled [ 0.229933] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.234079] Initialise system trusted keyrings [ 0.234159] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.237421] SLUB: Unable to add boot slab alias Acpi-ParseExt to sysfs [ 0.238530] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.238611] ntfs3: Max link count 4000 [ 0.238617] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this [ 0.238756] fuse: init (API version 7.34) [ 0.267748] NET: Registered PF_ALG protocol family [ 0.267772] Key type asymmetric registered [ 0.267778] Asymmetric key parser 'x509' registered [ 0.267837] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.267846] io scheduler mq-deadline registered [ 0.267852] io scheduler kyber registered [ 0.284726] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.285187] Non-volatile memory driver v1.3 [ 0.285239] Linux agpgart interface v0.103 [ 0.285529] [drm] amdgpu kernel modesetting enabled. [ 0.285560] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 0.286604] brd: module loaded [ 0.288388] loop: module loaded [ 0.288415] i2c-core: driver [at24] registered [ 0.288426] i2c-core: driver [eeprom] registered [ 0.288593] aeolia_pcie 0000:00:14.4: apcie_probe() [ 0.288633] aeolia_pcie 0000:00:14.4: apcie glue probe [ 0.288647] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 4c011120:41ceb016:01000200 [ 0.288664] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain [ 0.288673] aeolia_pcie 0000:00:14.4: devid = 164 [ 0.288681] AMD-Vi: Remapping Selected: a4 [ 0.288691] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23) (1024) [ 0.288958] apcie_msi_init((____ptrval____), (____ptrval____), 1, 0x400, (____ptrval____)) [ 0.288971] apcie_msi_init((____ptrval____), (____ptrval____), 2, 0x401, (____ptrval____)) [ 0.288980] apcie_msi_init((____ptrval____), (____ptrval____), 3, 0x402, (____ptrval____)) [ 0.288989] apcie_msi_init((____ptrval____), (____ptrval____), 4, 0x403, (____ptrval____)) [ 0.288997] apcie_msi_init((____ptrval____), (____ptrval____), 5, 0x404, (____ptrval____)) [ 0.289006] apcie_msi_init((____ptrval____), (____ptrval____), 6, 0x405, (____ptrval____)) [ 0.289014] apcie_msi_init((____ptrval____), (____ptrval____), 7, 0x406, (____ptrval____)) [ 0.289023] apcie_msi_init((____ptrval____), (____ptrval____), 8, 0x407, (____ptrval____)) [ 0.289031] apcie_msi_init((____ptrval____), (____ptrval____), 9, 0x408, (____ptrval____)) [ 0.289040] apcie_msi_init((____ptrval____), (____ptrval____), 10, 0x409, (____ptrval____)) [ 0.289048] apcie_msi_init((____ptrval____), (____ptrval____), 11, 0x40a, (____ptrval____)) [ 0.289057] apcie_msi_init((____ptrval____), (____ptrval____), 12, 0x40b, (____ptrval____)) [ 0.289065] apcie_msi_init((____ptrval____), (____ptrval____), 13, 0x40c, (____ptrval____)) [ 0.289074] apcie_msi_init((____ptrval____), (____ptrval____), 14, 0x40d, (____ptrval____)) [ 0.289082] apcie_msi_init((____ptrval____), (____ptrval____), 15, 0x40e, (____ptrval____)) [ 0.289090] apcie_msi_init((____ptrval____), (____ptrval____), 16, 0x40f, (____ptrval____)) [ 0.289099] apcie_msi_init((____ptrval____), (____ptrval____), 17, 0x410, (____ptrval____)) [ 0.289107] apcie_msi_init((____ptrval____), (____ptrval____), 18, 0x411, (____ptrval____)) [ 0.289116] apcie_msi_init((____ptrval____), (____ptrval____), 19, 0x412, (____ptrval____)) [ 0.289124] apcie_msi_init((____ptrval____), (____ptrval____), 20, 0x413, (____ptrval____)) [ 0.289133] apcie_msi_init((____ptrval____), (____ptrval____), 21, 0x414, (____ptrval____)) [ 0.289141] apcie_msi_init((____ptrval____), (____ptrval____), 22, 0x415, (____ptrval____)) [ 0.289150] apcie_msi_init((____ptrval____), (____ptrval____), 23, 0x416, (____ptrval____)) [ 0.289177] aeolia_pcie 0000:00:14.4: irq_domain_alloc_irqs = 1 [ 0.289184] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23 [ 0.289191] aeolia_pcie 0000:00:14.4: dev->irq=1 [ 0.289215] apcie_irq_msi_compose_msg [ 0.289221] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 (____ptrval____) [ 0.289233] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3) [ 0.289244] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 0.289254] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c841c, b7ffff40) [ 0.289263] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84bc, fee00000) [ 0.289272] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84dc, 00000000) [ 0.289280] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c849c, 00000000) [ 0.289289] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c854c, 00000003) [ 0.289343] i2c i2c-0: adapter [icc] registered [ 0.313454] Freeing initrd memory: 4008K

dmesg continued, wouldnt all fit in one post...... [ 0.316298] Turn ON BT/WLAN: ret=20, reply 00 00 00 00 [ 0.316385] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0 [ 0.361307] ret=46, reply 00 00 02 00 00 00 18 00 [ 0.366291] ret=20, reply 00 00 01 01 10 00 00 00 [ 0.371290] ret=20, reply 00 00 00 00 00 00 00 00 [ 0.371461] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 0.371470] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 0.371657] libphy: Fixed MDIO Bus: probed [ 0.371812] sky2: driver version 1.30 [ 0.371884] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1 [ 0.371941] sky2 0000:00:14.1: apcie_assign_irqs(1) (256) [ 0.371975] apcie_msi_init((____ptrval____), (____ptrval____), 24, 0x100, (____ptrval____)) [ 0.371991] sky2 0000:00:14.1: irq_domain_alloc_irqs = 18 [ 0.371997] sky2 0000:00:14.1: apcie_assign_irqs returning 1 [ 0.372015] apcie_irq_msi_compose_msg [ 0.372021] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 (____ptrval____) [ 0.372034] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 0.372045] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 0.372055] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 0.372064] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 0.372072] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 0.372081] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 0.372090] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 0.372359] sky2 0000:00:14.1 eth0: addr 0c:fe:45:8e:86:3b [ 0.372496] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3) (1792) [ 0.372545] apcie_msi_init((____ptrval____), (____ptrval____), 25, 0x700, (____ptrval____)) [ 0.372556] apcie_msi_init((____ptrval____), (____ptrval____), 26, 0x701, (____ptrval____)) [ 0.372565] apcie_msi_init((____ptrval____), (____ptrval____), 27, 0x702, (____ptrval____)) [ 0.372577] xhci_aeolia 0000:00:14.7: irq_domain_alloc_irqs = 19 [ 0.372583] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3 [ 0.372590] xhci_aeolia 0000:00:14.7: version 3.0 [ 0.372604] xhci_aeolia 0000:00:14.7: Belize SATA PHY init [ 1.372633] xhci_aeolia 0000:00:14.7: Belize SATA PHY Trace length : 6 [ 2.372713] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fa00e7d19, max_idle_ns: 440795227561 ns [ 2.372780] clocksource: Switched to clocksource tsc [ 2.372809] xhci_aeolia 0000:00:14.7: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl ATA mode [ 2.372827] xhci_aeolia 0000:00:14.7: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.372910] apcie_irq_msi_compose_msg [ 2.372917] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000019) mask=0x2 irq=26 hwirq=0x701 (____ptrval____) [ 2.372930] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 1, addr fee00000 data: 0x00000019 (25) [ 2.372941] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.372951] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.372960] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.372969] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.372978] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.372986] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c4, 00000019) [ 2.373240] scsi host0: ahci [ 2.373359] ata1: SATA max UDMA/133 abar m2097152@0xdc200000 port 0xdc200100 irq 26 [ 2.373375] xhci_aeolia_probe_one 0, controller is 90cf [ 2.373406] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.373422] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1 [ 2.373525] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x0000080000010010 [ 2.373543] apcie_irq_msi_compose_msg [ 2.373548] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 (____ptrval____) [ 2.373560] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24) [ 2.373571] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.373580] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.373588] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.373597] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.373606] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.373614] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c0, 00000018) [ 2.373636] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000 [ 2.373731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.373743] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.373751] usb usb1: Product: xHCI Host Controller [ 2.373757] usb usb1: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.373763] usb usb1: SerialNumber: 0000:00:14.7 [ 2.373948] hub 1-0:1.0: USB hub found [ 2.373968] hub 1-0:1.0: 2 ports detected [ 2.374075] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.374087] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2 [ 2.374097] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 2.374127] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.374169] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.374179] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.374187] usb usb2: Product: xHCI Host Controller [ 2.374193] usb usb2: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.374199] usb usb2: SerialNumber: 0000:00:14.7 [ 2.374333] hub 2-0:1.0: USB hub found [ 2.374350] hub 2-0:1.0: 2 ports detected [ 2.374988] xhci_aeolia_probe_one 2, controller is 90cf [ 2.375019] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.375029] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3 [ 2.375126] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x0000080000010010 [ 2.375144] apcie_irq_msi_compose_msg [ 2.375149] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 (____ptrval____) [ 2.375160] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26) [ 2.375172] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.375180] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.375189] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.375198] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.375206] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.375215] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c8, 0000001a) [ 2.375238] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000 [ 2.375308] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.375318] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.375326] usb usb3: Product: xHCI Host Controller [ 2.375332] usb usb3: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.375338] usb usb3: SerialNumber: 0000:00:14.7 [ 2.375478] hub 3-0:1.0: USB hub found [ 2.375495] hub 3-0:1.0: 1 port detected [ 2.375582] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.375595] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4 [ 2.375606] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 2.375634] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.375675] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.375685] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.375693] usb usb4: Product: xHCI Host Controller [ 2.375699] usb usb4: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.375705] usb usb4: SerialNumber: 0000:00:14.7 [ 2.375859] hub 4-0:1.0: USB hub found [ 2.375876] hub 4-0:1.0: 1 port detected [ 2.376081] usbcore: registered new interface driver uas [ 2.376122] usbcore: registered new interface driver usb-storage [ 2.376155] i8042: PNP: No PS/2 controller found. [ 2.376254] mousedev: PS/2 mouse device common for all mice [ 2.376343] usbcore: registered new interface driver xpad [ 2.376389] i2c_dev: i2c /dev entries driver [ 2.376444] i2c_dev: adapter [icc] registered as minor 0 [ 2.376458] i2c-core: driver [i2c-slave-eeprom] registered [ 2.376689] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 2.376716] sdhci: Secure Digital Host Controller Interface driver [ 2.376721] sdhci: Copyright(c) Pierre Ossman [ 2.376743] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0) [ 2.376779] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1) (768) [ 2.376804] apcie_msi_init((____ptrval____), (____ptrval____), 28, 0x300, (____ptrval____)) [ 2.376819] sdhci-pci 0000:00:14.3: irq_domain_alloc_irqs = 1c [ 2.376825] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1 [ 2.377024] apcie_irq_msi_compose_msg [ 2.377030] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 (____ptrval____) [ 2.377042] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27) [ 2.377053] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.377062] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8418, b7ffff30) [ 2.377071] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b8, fee00000) [ 2.377079] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d8, 00000000) [ 2.377088] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8498, 00000000) [ 2.377097] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8530, 0000001b) [ 2.377182] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA [ 2.377312] hid: raw HID events driver (C) Jiri Kosina [ 2.377464] usbcore: registered new interface driver usbhid [ 2.377472] usbhid: USB HID core driver [ 2.377728] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq [ 2.378196] NET: Registered PF_INET6 protocol family [ 2.378714] Segment Routing with IPv6 [ 2.378734] In-situ OAM (IOAM) with IPv6 [ 2.378769] NET: Registered PF_PACKET protocol family [ 2.378867] Bluetooth: RFCOMM TTY layer initialized [ 2.378898] Bluetooth: RFCOMM socket layer initialized [ 2.378905] Bluetooth: RFCOMM ver 1.11 [ 2.378910] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.378916] Bluetooth: BNEP filters: protocol multicast [ 2.378934] Bluetooth: BNEP socket layer initialized [ 2.378939] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.378946] Bluetooth: HIDP socket layer initialized [ 2.379492] microcode: CPU0: patch_level=0x07013005 [ 2.379507] microcode: CPU1: patch_level=0x07013005 [ 2.379524] microcode: CPU2: patch_level=0x07013005 [ 2.379557] microcode: CPU3: patch_level=0x07013005 [ 2.379578] microcode: CPU4: patch_level=0x07013005 [ 2.379609] microcode: CPU5: patch_level=0x07013005 [ 2.379644] microcode: CPU6: patch_level=0x07013005 [ 2.379662] microcode: CPU7: patch_level=0x07013005 [ 2.379720] microcode: Microcode Update Driver: v2.2. [ 2.379727] IPI shorthand broadcast: enabled [ 2.379742] AVX version of gcm_enc/dec engaged. [ 2.379966] AES CTR mode by8 optimization enabled [ 2.381253] sched_clock: Marking stable (2230314367, 150917635)->(2390085848, -8853846) [ 2.381452] registered taskstats version 1 [ 2.381459] Loading compiled-in X.509 certificates [ 2.382036] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 2.382151] amdgpu 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 2.382166] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9922 0x1002:0x9922 0x00). [ 2.382179] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 2.382205] [drm] register mmio base: 0xE4800000 [ 2.382211] [drm] register mmio size: 262144 [ 2.382221] [drm] add ip block number 0 <cik_common> [ 2.382226] [drm] add ip block number 1 <gmc_v7_0> [ 2.382232] [drm] add ip block number 2 <cik_ih> [ 2.382237] [drm] add ip block number 3 <dce_v8_0> [ 2.382242] [drm] add ip block number 4 <gfx_v7_0> [ 2.382248] [drm] add ip block number 5 <cik_sdma> [ 2.382279] ACPI Error: AE_BAD_PARAMETER, [ 2.382281] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1 [ 2.382282] Thread 1076508416 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20210730/utmutex-252) [ 2.382301] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20210730/utmutex-289) [ 2.382378] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2 [ 2.418189] [drm] BIOS signature incorrect 58 46 [ 2.418239] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR [ 2.418249] amdgpu: ATOM BIOS: 113-Starsha-005 [ 2.418370] i2c_dev: adapter [AMDGPU i2c bit bus 0x90] registered as minor 1 [ 2.418380] i2c i2c-1: adapter [AMDGPU i2c bit bus 0x90] registered [ 2.418390] i2c i2c-1: found normal entry for adapter 1, addr 0x50 [ 2.421928] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.429925] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.437922] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.445922] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.445926] i2c i2c-1: Used 4 tries to read from client at 0x50: failed, timeout? [ 2.445930] i2c i2c-1: NAK from device addr 0x50 msg #0 [ 2.449934] i2c i2c-1: found normal entry for adapter 1, addr 0x51 [ 2.453922] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.461922] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.469922] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.477921] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.477925] i2c i2c-1: Used 4 tries to read from client at 0x51: failed, timeout? [ 2.477929] i2c i2c-1: NAK from device addr 0x51 msg #0 [ 2.481934] i2c i2c-1: found normal entry for adapter 1, addr 0x52 [ 2.485923] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.490382] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.490437] mmc0: error -84 whilst initialising SDIO card [ 2.493922] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.501921] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.509921] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.509925] i2c i2c-1: Used 4 tries to read from client at 0x52: failed, timeout? [ 2.509930] i2c i2c-1: NAK from device addr 0x52 msg #0 [ 2.513933] i2c i2c-1: found normal entry for adapter 1, addr 0x53 [ 2.517923] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.523955] usb usb3-port1: over-current condition [ 2.525922] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.533921] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.541921] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.541925] i2c i2c-1: Used 4 tries to read from client at 0x53: failed, timeout? [ 2.541929] i2c i2c-1: NAK from device addr 0x53 msg #0 [ 2.545934] i2c i2c-1: found normal entry for adapter 1, addr 0x54 [ 2.549922] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.557922] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.565921] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.570519] random: fast init done [ 2.573922] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.573928] i2c i2c-1: Used 4 tries to read from client at 0x54: failed, timeout? [ 2.573932] i2c i2c-1: NAK from device addr 0x54 msg #0 [ 2.577934] i2c i2c-1: found normal entry for adapter 1, addr 0x55 [ 2.581926] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.589922] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.597922] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.605924] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.605928] i2c i2c-1: Used 4 tries to read from client at 0x55: failed, timeout? [ 2.605932] i2c i2c-1: NAK from device addr 0x55 msg #0 [ 2.609934] i2c i2c-1: found normal entry for adapter 1, addr 0x56 [ 2.613904] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.613922] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.613978] mmc0: error -84 whilst initialising SDIO card [ 2.615934] usb 1-1: new high-speed USB device number 2 using xhci_aeolia [ 2.621922] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.629921] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.637921] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.637925] i2c i2c-1: Used 4 tries to read from client at 0x56: failed, timeout? [ 2.637929] i2c i2c-1: NAK from device addr 0x56 msg #0 [ 2.641933] i2c i2c-1: found normal entry for adapter 1, addr 0x57 [ 2.645921] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.653922] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.661921] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.669922] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.669926] i2c i2c-1: Used 4 tries to read from client at 0x57: failed, timeout? [ 2.669930] i2c i2c-1: NAK from device addr 0x57 msg #0 [ 2.673992] i2c_dev: adapter [AMDGPU i2c bit bus 0x91] registered as minor 2 [ 2.674001] i2c i2c-2: adapter [AMDGPU i2c bit bus 0x91] registered [ 2.674008] i2c i2c-2: found normal entry for adapter 2, addr 0x50 [ 2.677924] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.685923] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.685955] usb usb4-port1: over-current condition [ 2.693922] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.701921] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.701925] i2c i2c-2: Used 4 tries to read from client at 0x50: failed, timeout? [ 2.701929] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 2.705934] i2c i2c-2: found normal entry for adapter 2, addr 0x51 [ 2.709922] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.717922] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.725921] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.733922] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.733926] i2c i2c-2: Used 4 tries to read from client at 0x51: failed, timeout? [ 2.733930] i2c i2c-2: NAK from device addr 0x51 msg #0 [ 2.737934] i2c i2c-2: found normal entry for adapter 2, addr 0x52 [ 2.741922] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.749686] usb 1-1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 2.749699] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.749707] usb 1-1: Product: USB2.0 HUB [ 2.749922] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.751812] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.751874] mmc0: error -84 whilst initialising SDIO card [ 2.757921] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.765921] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.765925] i2c i2c-2: Used 4 tries to read from client at 0x52: failed, timeout? [ 2.765929] i2c i2c-2: NAK from device addr 0x52 msg #0 [ 2.769933] i2c i2c-2: found normal entry for adapter 2, addr 0x53 [ 2.773921] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.781921] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.789921] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.790141] hub 1-1:1.0: USB hub found [ 2.790193] hub 1-1:1.0: 4 ports detected [ 2.797921] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.797925] i2c i2c-2: Used 4 tries to read from client at 0x53: failed, timeout? [ 2.797929] i2c i2c-2: NAK from device addr 0x53 msg #0 [ 2.801933] i2c i2c-2: found normal entry for adapter 2, addr 0x54 [ 2.805921] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.813922] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.821922] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.829921] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.829925] i2c i2c-2: Used 4 tries to read from client at 0x54: failed, timeout? [ 2.829929] i2c i2c-2: NAK from device addr 0x54 msg #0 [ 2.833934] i2c i2c-2: found normal entry for adapter 2, addr 0x55 [ 2.837921] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.837956] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.843915] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30014, max UDMA/133 [ 2.845921] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.853921] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.861926] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.861929] i2c i2c-2: Used 4 tries to read from client at 0x55: failed, timeout? [ 2.861933] i2c i2c-2: NAK from device addr 0x55 msg #0 [ 2.865934] i2c i2c-2: found normal entry for adapter 2, addr 0x56 [ 2.869924] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.877922] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.881947] usb 2-2: new SuperSpeed USB device number 2 using xhci_aeolia [ 2.885921] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.893924] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.893927] i2c i2c-2: Used 4 tries to read from client at 0x56: failed, timeout? [ 2.893931] i2c i2c-2: NAK from device addr 0x56 msg #0 [ 2.897935] i2c i2c-2: found normal entry for adapter 2, addr 0x57 [ 2.901922] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.909922] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.917922] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.925922] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.925927] i2c i2c-2: Used 4 tries to read from client at 0x57: failed, timeout? [ 2.925931] i2c i2c-2: NAK from device addr 0x57 msg #0 [ 2.929981] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 2.930006] amdgpu 0000:00:01.0: amdgpu: VRAM: 1024M 0x0000000F00000000 - 0x0000000F3FFFFFFF (1024M used) [ 2.930017] amdgpu 0000:00:01.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 2.930044] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 2.930051] [drm] RAM width 64bits UNKNOWN [ 2.930111] [drm] amdgpu: 1024M of VRAM memory ready [ 2.930119] [drm] amdgpu: 3072M of GTT memory ready. [ 2.930128] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.930149] amdgpu 0000:00:01.0: amdgpu: Done gart [ 2.930170] amdgpu 0000:00:01.0: amdgpu: Done init [ 2.930219] [drm] PCIE GART of 512M enabled (table at 0x0000000F0004B000). [ 2.930432] usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 2.930444] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.930452] usb 2-2: Product: Ultra USB 3.0 [ 2.930457] usb 2-2: Manufacturer: SanDisk [ 2.930466] usb 2-2: SerialNumber: 010114902323d954b2e61624fac2be9cee21308433fc2f9132cd345d140253b6efab000000000000000000009e13ff4a00071800915581075328119a [ 2.930910] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.930934] [drm] AMDGPU Display Connectors [ 2.930942] [drm] Connector 0: [ 2.930947] [drm] HDMI-A-1 [ 2.930952] [drm] HPD1 [ 2.930956] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 2.930965] [drm] Encoders: [ 2.930969] [drm] DFP1: INTERNAL_UNIPHY [ 2.931160] scsi host1: usb-storage 2-2:1.0 [ 2.933651] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.933765] mmc0: error -84 whilst initialising SDIO card [ 2.935969] amdgpu 0000:00:01.0: amdgpu: SE 2, SH per SE 1, CU per SH 9, active_cu_number 18 [ 2.961013] amdgpu: ps4_bridge_get_modes [ 2.961065] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 2.961629] [drm] fb mappable at 0x100167000 [ 2.961636] [drm] vram apper at 0x100000000 [ 2.961641] [drm] size 8294400 [ 2.961645] [drm] fb depth is 24 [ 2.961648] [drm] pitch is 7680 [ 2.963459] fbcon: amdgpudrmfb (fb0) is primary device [ 2.966003] amdgpu: ps4_bridge_get_modes [ 2.966024] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 2.995888] [drm:0xffffffff815ec568] *ERROR* clock recovery tried 5 times [ 2.995898] [drm:0xffffffff815ec507] *ERROR* clock recovery failed [ 3.070025] usb 1-1.3: new low-speed USB device number 3 using xhci_aeolia [ 3.149706] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=604a, bcdDevice= 1.00 [ 3.149716] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.149721] usb 1-1.3: Product: HP USB Optical Mouse [ 3.149724] usb 1-1.3: Manufacturer: PixArt [ 3.208103] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:604A.0001/input/input3 [ 3.208430] hid-generic 0003:03F0:604A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.7-1.3/input0 [ 3.272026] usb 1-1.4: new low-speed USB device number 4 using xhci_aeolia [ 3.354849] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06 [ 3.354859] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.354863] usb 1-1.4: Product: Dell USB Keyboard [ 3.354866] usb 1-1.4: Manufacturer: Dell [ 3.402207] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2003.0002/input/input4 [ 3.454401] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.7-1.4/input0 [ 3.809274] ata1.00: ATA Identify Device Log not supported [ 3.809287] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.816524] ata1.00: ATA Identify Device Log not supported [ 3.816540] ata1.00: configured for UDMA/133 [ 3.816753] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0014 PQ: 0 ANSI: 5 [ 3.817129] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.817311] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.817320] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.817340] sd 0:0:0:0: [sda] Write Protect is off [ 3.817345] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.817377] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.958661] scsi 1:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 3.958880] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.959128] sd 1:0:0:0: [sdb] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 3.959909] sd 1:0:0:0: [sdb] Write Protect is off [ 3.959914] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.960203] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.963431] sdb: sdb1 sdb2 [ 3.964602] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 4.054345] Console: switching to colour frame buffer device 240x67 [ 4.069278] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device [ 4.070015] i2c_dev: adapter [card0-HDMI-A-1] registered as minor 3 [ 4.070033] i2c i2c-3: adapter [card0-HDMI-A-1] registered [ 4.070044] i2c i2c-3: found normal entry for adapter 3, addr 0x50 [ 4.070550] i2c i2c-3: Creating eeprom at 0x50 [ 4.070580] eeprom 3-0050: probe [ 4.070586] eeprom 3-0050: eeprom driver is deprecated, please use at24 instead [ 4.070690] i2c i2c-3: client [eeprom] registered with bus id 3-0050 [ 4.070694] i2c i2c-3: found normal entry for adapter 3, addr 0x51 [ 4.071008] i2c i2c-3: found normal entry for adapter 3, addr 0x52 [ 4.071319] i2c i2c-3: found normal entry for adapter 3, addr 0x53 [ 4.071628] i2c i2c-3: found normal entry for adapter 3, addr 0x54 [ 4.071938] i2c i2c-3: found normal entry for adapter 3, addr 0x55 [ 4.072247] i2c i2c-3: found normal entry for adapter 3, addr 0x56 [ 4.072556] i2c i2c-3: found normal entry for adapter 3, addr 0x57 [ 4.072884] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:00:01.0 on minor 0 [ 4.072969] [drm:0xffffffff816003e6] *ERROR* unable to create amdgpu_preempt_ib debugsfs file [ 4.073054] [drm:0xffffffff815cc17d] *ERROR* Creating debugfs files failed (-1). [ 4.073182] ahci 0000:00:14.2: version 3.0 [ 4.073249] ahci 0000:00:14.2: apcie_assign_irqs(1) (512) [ 4.076849] apcie_msi_init((____ptrval____), (____ptrval____), 31, 0x200, (____ptrval____)) [ 4.080452] ahci 0000:00:14.2: irq_domain_alloc_irqs = 1f [ 4.083976] ahci 0000:00:14.2: apcie_assign_irqs returning 1 [ 4.087493] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode [ 4.091041] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.094688] apcie_irq_msi_compose_msg [ 4.098275] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001e) mask=0x1 irq=31 hwirq=0x200 (____ptrval____) [ 4.101972] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001e (30) [ 4.105665] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 4.109383] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8414, b7ffff20) [ 4.113090] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b4, fee00000) [ 4.116781] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d4, 00000000) [ 4.120433] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8494, 00000000) [ 4.124049] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8520, 0000001e) [ 4.128114] scsi host2: ahci [ 4.131739] ata2: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31 [ 4.135456] printk: console [netcon0] enabled [ 4.139091] netconsole: network logging started [ 4.142754] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.147658] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.151297] ALSA device list: [ 4.154977] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 4.154984] #0: HD-Audio Generic at 0xe4840000 irq 29 [ 4.158691] cfg80211: failed to load regulatory.db [ 4.159689] sda: sda1 sda3 sda5 sda7 sda9 sda10 sda11 sda12 sda13 sda17 sda19 sda25 sda27 sda29 sda31 [ 4.171087] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.606027] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.610222] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 9.846039] ata2.00: qc timeout (cmd 0xa1) [ 9.849916] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 10.326022] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.330316] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 20.597978] ata2.00: qc timeout (cmd 0xa1) [ 20.601944] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 20.605822] ata2: limiting SATA link speed to 1.5 Gbps [ 21.078021] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.082207] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 51.318034] ata2.00: qc timeout (cmd 0xa1) [ 51.321900] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 51.798022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.802475] Freeing unused kernel image (initmem) memory: 936K [ 51.806331] Write protecting the kernel read-only data: 24576k [ 51.811158] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 51.815491] Freeing unused kernel image (rodata/data gap) memory: 1372K [ 51.819186] rodata_test: all tests were successful [ 51.822858] Run /init as init process [ 51.826505] with arguments: [ 51.826506] /init [ 51.826508] with environment: [ 51.826509] HOME=/ [ 51.826511] TERM=linux [ 63.293613] usb 1-1.3: USB disconnect, device number 3 [ 65.001025] usb 1-1.3: new low-speed USB device number 5 using xhci_aeolia [ 65.080621] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=604a, bcdDevice= 1.00 [ 65.080634] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 65.080639] usb 1-1.3: Product: HP USB Optical Mouse [ 65.080642] usb 1-1.3: Manufacturer: PixArt [ 65.119203] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:604A.0003/input/input5 [ 65.119406] hid-generic 0003:03F0:604A.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.7-1.3/input0 [ 67.931507] random: crng init done [ 68.365639] EXT4-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended [ 68.372454] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null). Quota mode: disabled. [ 99.732361] systemd[1]: System time before build time, advancing clock. [ 99.808739] systemd[1]: systemd 248.3-1ubuntu8.2 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 99.820192] systemd[1]: Detected architecture x86-64. [ 99.840036] systemd[1]: Hostname set to <ITmania-PS4>. [ 101.261465] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid â\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 101.328483] systemd[1]: Queued start job for default target Graphical Interface. [ 101.330730] systemd[1]: Created slice system-modprobe.slice. [ 101.331445] systemd[1]: Created slice User and Session Slice. [ 101.331742] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 101.332292] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 101.332595] systemd[1]: Reached target User and Group Name Lookups. [ 101.332770] systemd[1]: Reached target Remote File Systems. [ 101.332942] systemd[1]: Reached target Slices. [ 101.333145] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 101.333482] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 101.333856] systemd[1]: Listening on LVM2 poll daemon socket. [ 101.338881] systemd[1]: Listening on Syslog Socket. [ 101.339403] systemd[1]: Listening on fsck to fsckd communication Socket. [ 101.339700] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 101.340285] systemd[1]: Listening on Journal Audit Socket. [ 101.340618] systemd[1]: Listening on Journal Socket (/dev/log). [ 101.341019] systemd[1]: Listening on Journal Socket. [ 101.342484] systemd[1]: Listening on udev Control Socket. [ 101.342819] systemd[1]: Listening on udev Kernel Socket. [ 101.344525] systemd[1]: Mounting Huge Pages File System... [ 101.346348] systemd[1]: Mounting POSIX Message Queue File System... [ 101.346877] systemd[1]: Condition check resulted in Kernel Debug File System being skipped. [ 101.347125] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 101.347442] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 101.347450] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 101.348800] systemd[1]: Starting Journal Service... [ 101.349468] systemd[1]: Finished Availability of block devices. [ 101.351727] systemd[1]: Starting Set the console keyboard layout... [ 101.352032] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 101.353603] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 101.355519] systemd[1]: Starting Load Kernel Module configfs... [ 101.357652] systemd[1]: Starting Load Kernel Module drm... [ 101.359947] systemd[1]: Starting Load Kernel Module fuse... [ 101.369489] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 101.369614] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 101.384724] systemd[1]: Starting Load Kernel Modules... [ 101.386495] systemd[1]: Starting Remount Root and Kernel File Systems... [ 101.388577] systemd[1]: Starting Coldplug All udev Devices... [ 101.390677] systemd[1]: Starting Uncomplicated firewall... [ 101.394376] systemd[1]: Mounted Huge Pages File System. [ 101.394738] systemd[1]: Mounted POSIX Message Queue File System. [ 101.395419] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 101.395876] systemd[1]: Finished Load Kernel Module configfs. [ 101.396610] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 101.397047] systemd[1]: Finished Load Kernel Module drm. [ 101.397694] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 101.398121] systemd[1]: Finished Load Kernel Module fuse. [ 101.400111] systemd[1]: Mounting FUSE Control File System... [ 101.401854] systemd[1]: Mounting Kernel Configuration File System... [ 101.404509] systemd[1]: Mounted FUSE Control File System. [ 101.406330] systemd[1]: Mounted Kernel Configuration File System. [ 101.446395] systemd[1]: Finished Uncomplicated firewall. [ 101.460161] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE [ 101.460477] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'. [ 101.460973] systemd[1]: Failed to start Load Kernel Modules. [ 101.466179] systemd[1]: Starting Apply Kernel Variables... [ 101.489853] systemd[1]: Finished Apply Kernel Variables. [ 101.504626] systemd[1]: Started Journal Service. [ 103.067183] Adding 524284k swap on /swapfile. Priority:-2 extents:29 across:1785852k FS [ 103.067652] systemd-journald[288]: Received client request to flush runtime journal. [ 103.114601] systemd-journald[288]: File /var/log/journal/10ad53ab65fd48e59aa1af28b2b6870c/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 104.403802] sky2 0000:00:14.1 enp0s20f1: renamed from eth0 [ 108.772740] apcie_irq_msi_compose_msg [ 108.775190] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 0000000097a3c1c8 [ 108.775201] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 108.775208] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 108.775213] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 108.775218] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 108.775222] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 108.775226] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 108.775230] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 108.775555] sky2 0000:00:14.1 enp0s20f1: enabling interface [ 109.075247] loop0: detected capacity change from 0 to 8 [ 109.076052] systemd-journald[288]: Failed to read journal file /var/log/journal/10ad53ab65fd48e59aa1af28b2b6870c/user-1001.journal for rotation, trying to move it out of the way: Text file busy [ 111.430465] amdgpu: ps4_bridge_get_modes [ 111.430491] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 111.440513] amdgpu: ps4_bridge_get_modes [ 111.440539] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 132.662387] amdgpu: ps4_bridge_get_modes [ 132.662414] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 132.672362] amdgpu: ps4_bridge_get_modes [ 132.672383] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 134.197781] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 563.873010] usb 1-1.2: new high-speed USB device number 6 using xhci_aeolia [ 564.116665] usb 1-1.2: New USB device found, idVendor=05dc, idProduct=a810, bcdDevice=11.00 [ 564.116678] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 564.116683] usb 1-1.2: Product: USB Flash Drive [ 564.116687] usb 1-1.2: Manufacturer: Lexar [ 564.116690] usb 1-1.2: SerialNumber: AA1OY1DH2D1SZ0UY [ 564.117475] usb-storage 1-1.2:1.0: USB Mass Storage device detected [ 564.117833] scsi host3: usb-storage 1-1.2:1.0 [ 566.358265] scsi 3:0:0:0: Direct-Access Lexar JD FireFly 1100 PQ: 0 ANSI: 0 CCS [ 566.358581] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 568.783713] sd 3:0:0:0: [sdc] 7831552 512-byte logical blocks: (4.01 GB/3.73 GiB) [ 568.784543] sd 3:0:0:0: [sdc] Write Protect is off [ 568.784549] sd 3:0:0:0: [sdc] Mode Sense: 43 00 00 00 [ 568.786061] sd 3:0:0:0: [sdc] No Caching mode page found [ 568.786071] sd 3:0:0:0: [sdc] Assuming drive cache: write through [ 568.789659] sdc: sdc1 [ 568.792092] sd 3:0:0:0: [sdc] Attached SCSI removable disk [ 1434.419066] mwlwifi: loading out-of-tree module taints kernel. [ 1493.999117] sky2 0000:00:14.1 enp0s20f1: disabling interface [ 1497.122145] apcie_irq_msi_compose_msg [ 1497.122160] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 0000000097a3c1c8 [ 1497.122170] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 1497.122177] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 1497.122182] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 1497.122186] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 1497.122190] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 1497.122195] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 1497.122198] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 1497.122459] sky2 0000:00:14.1 enp0s20f1: enabling interface

joesnose Thank you. The errors in the screenshot is expected. Don't worry. The dmesg is after you ran insmod right? Also, upon running insmod, did the terminal throw any error?

joesnose Found something interesting in the logs. Can you use this initram to boot and try running insmod again? See if it works or else, dmesg?

Tried withe the initram you posted .....still no network, no error given in terminal when i insert the module... [ 0.000000] ps4: x86_ps4_early_setup: PS4 early setup [ 0.000000] Linux version 5.15.15 (noob@noob) (gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP Mon Jun 10 18:54:03 IST 2024 [ 0.000000] Command line: drm.edid_firmware=edid/1920x1080.bin panic=0 clocksource=tsc root=LABEL=gentoo rootdelay=6 [ 0.000000] KERNEL supported cpus: [ 0.000000] AMD AuthenticAMD [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data [ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.1 present. [ 0.000000] DMI: , BIOS unde Mon 01/15/2018 5:2 [ 0.000000] ps4: Unable to measure TSC frequency, assuming default. [ 0.000000] tsc: Detected 1594.000 MHz processor [ 0.001132] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.001139] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.001151] last_pfn = 0x27f000 max_arch_pfn = 0x400000000 [ 0.001432] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.001805] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved [ 0.001822] last_pfn = 0x80000 max_arch_pfn = 0x400000000 [ 0.009841] Using GB pages for direct mapping [ 0.011210] RAMDISK: [mem 0x41800000-0x41bedfff] [ 0.011222] ACPI: Early table checksum verification disabled [ 0.011229] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE ) [ 0.011238] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE ORBIS 20121218 INTL 20110211) [ 0.011251] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE ORBIS 20130205 INTL 20110211) [ 0.011264] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE ORBIS 20121002 INTL 20110211) [ 0.011273] ACPI: FACS 0x00000000000E012C 000040 [ 0.011279] ACPI: FACS 0x00000000000E012C 000040 [ 0.011286] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE ORBIS 20120725 INTL 20110211) [ 0.011294] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE ORBIS 20120725 INTL 20110211) [ 0.011302] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.011310] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F PS4KEXEC 20161225 KEXC 20161225) [ 0.011317] ACPI: Reserving FACP table memory at [mem 0xe016c-0xe025f] [ 0.011321] ACPI: Reserving DSDT table memory at [mem 0xe0430-0xe05bb] [ 0.011324] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b] [ 0.011327] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b] [ 0.011330] ACPI: Reserving APIC table memory at [mem 0xe0298-0xe0303] [ 0.011333] ACPI: Reserving MCFG table memory at [mem 0xe0304-0xe033f] [ 0.011336] ACPI: Reserving SSDT table memory at [mem 0xe0730-0xe2073] [ 0.011338] ACPI: Reserving IVRS table memory at [mem 0xe2074-0xe20c7] [ 0.011407] No NUMA configuration found [ 0.011410] Faking a node at [mem 0x0000000000000000-0x000000027effffff] [ 0.011419] NODE_DATA(0) allocated [mem 0x27effa000-0x27effdfff] [ 0.011459] Zone ranges: [ 0.011461] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.011467] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.011471] Normal [mem 0x0000000100000000-0x000000027effffff] [ 0.011475] Movable zone start for each node [ 0.011478] Early memory node ranges [ 0.011480] node 0: [mem 0x0000000000001000-0x0000000000007fff] [ 0.011484] node 0: [mem 0x0000000000080000-0x0000000000099fff] [ 0.011488] node 0: [mem 0x0000000000100000-0x00000000003fffff] [ 0.011491] node 0: [mem 0x0000000000480000-0x000000000067ffff] [ 0.011494] node 0: [mem 0x0000000000700000-0x000000007efe7fff] [ 0.011498] node 0: [mem 0x000000007f000000-0x000000007fffffff] [ 0.011501] node 0: [mem 0x0000000140000000-0x000000027effffff] [ 0.011506] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff] [ 0.011513] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.011520] On node 0, zone DMA: 120 pages in unavailable ranges [ 0.011538] On node 0, zone DMA: 102 pages in unavailable ranges [ 0.011552] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.011592] On node 0, zone DMA: 128 pages in unavailable ranges [ 0.019326] On node 0, zone DMA32: 24 pages in unavailable ranges [ 0.038913] On node 0, zone Normal: 4096 pages in unavailable ranges [ 0.039608] ACPI: No IOAPIC entries present [ 0.039612] ACPI: Using ACPI for processor (LAPIC) configuration information [ 0.039617] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.039652] [mem 0xfc000000-0xffffffff] available for PCI devices [ 0.039659] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.051354] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.051977] percpu: Embedded 39 pages/cpu s120600 r8192 d30952 u262144 [ 0.052003] pcpu-alloc: s120600 r8192 d30952 u262144 alloc=1*2097152 [ 0.052010] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.052058] Built 1 zonelists, mobility grouping on. Total pages: 1801775 [ 0.052063] Policy zone: Normal [ 0.052068] Kernel command line: drm.edid_firmware=edid/1920x1080.bin panic=0 clocksource=tsc root=LABEL=gentoo rootdelay=6 [ 0.052123] printk: log_buf_len individual max cpu contribution: 65536 bytes [ 0.052127] printk: log_buf_len total cpu_extra contributions: 458752 bytes [ 0.052130] printk: log_buf_len min size: 65536 bytes [ 0.052966] printk: log_buf_len: 524288 bytes [ 0.052975] printk: early log buf free: 58904(89%) [ 0.054691] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.055570] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.055642] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.124119] Memory: 7089568K/7321636K available (16387K kernel code, 899K rwdata, 4772K rodata, 936K init, 556K bss, 231812K reserved, 0K cma-reserved) [ 0.124237] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.124360] rcu: Hierarchical RCU implementation. [ 0.124365] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.124380] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0 [ 0.124515] __common_interrupt: 0.49 No irq handler for vector [ 0.124545] Console: colour dummy device 80x25 [ 0.124893] printk: console [tty0] enabled [ 0.124934] ACPI: Core revision 20210730 [ 0.125010] ACPI: setting ELCR to 0200 (from ffff) [ 0.125030] Failed to register legacy timer interrupt [ 0.125035] APIC: Switch to symmetric I/O mode setup [ 0.150111] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x16fa00e7d19, max_idle_ns: 440795227561 ns [ 0.150134] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.00 BogoMIPS (lpj=1594000) [ 0.150145] pid_max: default: 32768 minimum: 301 [ 0.150230] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.150269] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.150680] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 [ 0.150689] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0 [ 0.150699] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.150708] Spectre V2 : Spectre mitigation: kernel not compiled with retpoline; no mitigation available! [ 0.150711] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl [ 0.151126] Freeing SMP alternatives memory: 40K [ 0.151126] smpboot: CPU0: AMD DG1101SKF84HV (family: 0x16, model: 0x13, stepping: 0x1) [ 0.151126] Performance Events: AMD PMU driver. [ 0.151126] ... version: 0 [ 0.151126] ... bit width: 48 [ 0.151126] ... generic registers: 4 [ 0.151126] ... value mask: 0000ffffffffffff [ 0.151126] ... max period: 00007fffffffffff [ 0.151126] ... fixed-purpose events: 0 [ 0.151126] ... event mask: 000000000000000f [ 0.151126] rcu: Hierarchical SRCU implementation. [ 0.151126] smp: Bringing up secondary CPUs ... [ 0.151126] x86: Booting SMP configuration: [ 0.151126] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 [ 0.160224] smp: Brought up 1 node, 8 CPUs [ 0.160243] smpboot: Max logical packages: 1 [ 0.160249] smpboot: Total of 8 processors activated (25504.00 BogoMIPS) [ 0.162359] devtmpfs: initialized [ 0.162359] random: get_random_u32 called from 0xffffffff8146fe0f with crng_init=0 [ 0.162359] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.162359] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.162359] prandom: seed boundary self test passed [ 0.164203] prandom: 100 self tests passed [ 0.168875] prandom32: self test passed (less than 6 bits correlated) [ 0.168973] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.169039] audit: initializing netlink subsys (disabled) [ 0.169134] audit: type=2000 audit(0.018:1): state=initialized audit_enabled=0 res=1 [ 0.169270] i2c-core: driver [dummy] registered [ 0.169276] thermal_sys: Registered thermal governor 'step_wise' [ 0.169304] cpuidle: using governor ladder [ 0.169304] cpuidle: using governor menu [ 0.169304] ACPI: bus type PCI registered [ 0.169304] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.169304] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.169304] PCI: Using configuration type 1 for base access [ 0.177303] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.178153] cryptd: max_cpu_qlen set to 1000 [ 0.180220] ACPI: Added _OSI(Module Device) [ 0.180229] ACPI: Added _OSI(Processor Device) [ 0.180235] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.180240] ACPI: Added _OSI(Processor Aggregator Device) [ 0.180247] ACPI: Added _OSI(Linux-Dell-Video) [ 0.180252] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.180258] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.181975] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.182300] ACPI: OSL: SCI (IRQ9) allocation failed [ 0.182309] ACPI Error: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20210730/evevent-96) [ 0.182321] ACPI: Unable to start the ACPI Interpreter [ 0.182326] ACPI Error: Could not remove SCI handler (20210730/evmisc-251) [ 0.182607] iommu: Default domain type: Passthrough [ 0.182636] vgaarb: loaded [ 0.182636] SCSI subsystem initialized [ 0.182636] libata version 3.00 loaded. [ 0.182636] usbcore: registered new interface driver usbfs [ 0.182636] usbcore: registered new interface driver hub [ 0.182636] usbcore: registered new device driver usb [ 0.183133] Advanced Linux Sound Architecture Driver Initialized. [ 0.183358] Bluetooth: Core ver 2.22 [ 0.183375] NET: Registered PF_BLUETOOTH protocol family [ 0.183381] Bluetooth: HCI device and connection manager initialized [ 0.183389] Bluetooth: HCI socket layer initialized [ 0.183396] Bluetooth: L2CAP socket layer initialized [ 0.183403] Bluetooth: SCO socket layer initialized [ 0.183438] PCI: Probing PCI hardware [ 0.183438] PCI: root bus 00: using default resources [ 0.183438] PCI: Probing PCI hardware (bus 00) [ 0.183438] PCI host bridge to bus 0000:00 [ 0.183438] pci_bus 0000:00: root bus resource [io 0x0000-0xffff] [ 0.183438] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff] [ 0.183438] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.183438] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000 [ 0.183438] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600 [ 0.183438] pci 0000:00:01.0: [1002:9922] type 00 class 0x030000 [ 0.183454] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref] [ 0.183470] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref] [ 0.183482] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff] [ 0.183493] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff] [ 0.183504] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref] [ 0.183516] pci 0000:00:01.0: enabling Extended Tags [ 0.183545] pci 0000:00:01.0: supports D1 D2 [ 0.183552] pci 0000:00:01.0: PME# supported from D1 D2 D3hot [ 0.183609] pci 0000:00:01.0: vgaarb: setting as boot VGA device [ 0.183617] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.183646] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300 [ 0.183663] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit] [ 0.183690] pci 0000:00:01.1: enabling Extended Tags [ 0.183715] pci 0000:00:01.1: supports D1 D2 [ 0.183788] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000 [ 0.184219] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000 [ 0.184242] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit] [ 0.184256] pci 0000:00:14.0: reg 0x18: [io 0x1000-0x10ff] [ 0.184284] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.184332] pci 0000:00:14.0: supports D1 [ 0.184339] pci 0000:00:14.0: PME# supported from D0 D1 D3hot [ 0.184435] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001 [ 0.184456] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit] [ 0.184491] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.184534] pci 0000:00:14.1: supports D1 [ 0.184540] pci 0000:00:14.1: PME# supported from D0 D1 D3hot [ 0.184628] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002 [ 0.184650] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit] [ 0.184679] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff] [ 0.184692] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.184735] pci 0000:00:14.2: supports D1 [ 0.184741] pci 0000:00:14.2: PME# supported from D0 D1 D3hot [ 0.184827] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003 [ 0.184848] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit] [ 0.184882] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref] [ 0.184925] pci 0000:00:14.3: supports D1 [ 0.184932] pci 0000:00:14.3: PME# supported from D0 D1 D3hot [ 0.185018] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004 [ 0.185039] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit] [ 0.185056] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit] [ 0.185072] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit] [ 0.185085] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185134] pci 0000:00:14.4: supports D1 [ 0.185140] pci 0000:00:14.4: PME# supported from D0 D1 D3hot [ 0.185227] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005 [ 0.185249] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit] [ 0.185265] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit] [ 0.185288] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185331] pci 0000:00:14.5: supports D1 [ 0.185337] pci 0000:00:14.5: PME# supported from D0 D1 D3hot [ 0.185426] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006 [ 0.185447] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit] [ 0.185463] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit] [ 0.185477] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff] [ 0.185489] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff] [ 0.185502] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185544] pci 0000:00:14.6: supports D1 [ 0.185550] pci 0000:00:14.6: PME# supported from D0 D1 D3hot [ 0.185638] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007 [ 0.185660] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit] [ 0.185677] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit] [ 0.185693] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit] [ 0.185706] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.185749] pci 0000:00:14.7: supports D1 [ 0.185755] pci 0000:00:14.7: PME# supported from D0 D1 D3hot [ 0.185837] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000 [ 0.185913] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000 [ 0.185987] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000 [ 0.186059] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000 [ 0.186143] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000 [ 0.186219] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000 [ 0.186295] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.187773] PCI: pci_cache_line_size set to 64 bytes [ 0.187810] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff] [ 0.187816] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff] [ 0.187819] e820: reserve RAM buffer [mem 0x00680000-0x006fffff] [ 0.187822] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff] [ 0.187825] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff] [ 0.187981] clocksource: Switched to clocksource tsc-early [ 0.187981] pnp: PnP ACPI: disabled [ 0.190000] NET: Registered PF_INET protocol family [ 0.190298] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.192404] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.192440] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.192648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.192923] TCP: Hash tables configured (established 65536 bind 65536) [ 0.193009] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.193061] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.193184] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.193542] RPC: Registered named UNIX socket transport module. [ 0.193550] RPC: Registered udp transport module. [ 0.193555] RPC: Registered tcp transport module. [ 0.193560] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.193867] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref] [ 0.193883] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref] [ 0.193895] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref] [ 0.193905] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref] [ 0.193916] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref] [ 0.193927] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref] [ 0.193937] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref] [ 0.193947] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref] [ 0.193958] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref] [ 0.193974] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.193982] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff] [ 0.194010] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.194056] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0 [ 0.194069] pci 0000:00:02.0: CLS mismatch (64 != 512), using 64 bytes [ 0.194169] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq [ 0.194250] pci 0000:00:14.0: Adding to iommu group 0 [ 0.194282] pci 0000:00:14.1: Adding to iommu group 0 [ 0.194306] pci 0000:00:14.2: Adding to iommu group 0 [ 0.194307] Trying to unpack rootfs image as initramfs... [ 0.194332] pci 0000:00:14.3: Adding to iommu group 0 [ 0.194354] pci 0000:00:14.4: Adding to iommu group 0 [ 0.194376] pci 0000:00:14.5: Adding to iommu group 0 [ 0.194399] pci 0000:00:14.6: Adding to iommu group 0 [ 0.194421] pci 0000:00:14.7: Adding to iommu group 0 [ 0.194462] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40 [ 0.194469] AMD-Vi: Extended features (0x840): IA [ 0.194478] AMD-Vi: Interrupt remapping enabled [ 0.194613] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.194621] software IO TLB: mapped [mem 0x000000007afe8000-0x000000007efe8000] (64MB) [ 0.194679] LVT offset 0 assigned for vector 0x400 [ 0.203300] perf: AMD IBS detected (0x000000ff) [ 0.203730] kvm: Nested Virtualization enabled [ 0.203737] SVM: kvm: Nested Paging enabled [ 0.229157] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.234142] Initialise system trusted keyrings [ 0.234222] workingset: timestamp_bits=40 max_order=21 bucket_order=0 [ 0.237470] SLUB: Unable to add boot slab alias Acpi-ParseExt to sysfs [ 0.238570] ntfs: driver 2.1.32 [Flags: R/W]. [ 0.238650] ntfs3: Max link count 4000 [ 0.238657] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this [ 0.238817] fuse: init (API version 7.34) [ 0.268478] NET: Registered PF_ALG protocol family [ 0.268503] Key type asymmetric registered [ 0.268508] Asymmetric key parser 'x509' registered [ 0.268568] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.268577] io scheduler mq-deadline registered [ 0.268582] io scheduler kyber registered [ 0.285738] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.286194] Non-volatile memory driver v1.3 [ 0.286244] Linux agpgart interface v0.103 [ 0.286556] [drm] amdgpu kernel modesetting enabled. [ 0.286586] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 0.287591] brd: module loaded [ 0.289352] loop: module loaded [ 0.289382] i2c-core: driver [at24] registered [ 0.289392] i2c-core: driver [eeprom] registered [ 0.289557] aeolia_pcie 0000:00:14.4: apcie_probe() [ 0.289597] aeolia_pcie 0000:00:14.4: apcie glue probe [ 0.289611] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 4c011120:41ceb016:01000200 [ 0.289629] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain [ 0.289637] aeolia_pcie 0000:00:14.4: devid = 164 [ 0.289645] AMD-Vi: Remapping Selected: a4 [ 0.289655] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23) (1024) [ 0.289916] apcie_msi_init((____ptrval____), (____ptrval____), 1, 0x400, (____ptrval____)) [ 0.289929] apcie_msi_init((____ptrval____), (____ptrval____), 2, 0x401, (____ptrval____)) [ 0.289938] apcie_msi_init((____ptrval____), (____ptrval____), 3, 0x402, (____ptrval____)) [ 0.289947] apcie_msi_init((____ptrval____), (____ptrval____), 4, 0x403, (____ptrval____)) [ 0.289956] apcie_msi_init((____ptrval____), (____ptrval____), 5, 0x404, (____ptrval____)) [ 0.289965] apcie_msi_init((____ptrval____), (____ptrval____), 6, 0x405, (____ptrval____)) [ 0.289973] apcie_msi_init((____ptrval____), (____ptrval____), 7, 0x406, (____ptrval____)) [ 0.289982] apcie_msi_init((____ptrval____), (____ptrval____), 8, 0x407, (____ptrval____)) [ 0.289990] apcie_msi_init((____ptrval____), (____ptrval____), 9, 0x408, (____ptrval____)) [ 0.289998] apcie_msi_init((____ptrval____), (____ptrval____), 10, 0x409, (____ptrval____)) [ 0.290007] apcie_msi_init((____ptrval____), (____ptrval____), 11, 0x40a, (____ptrval____)) [ 0.290016] apcie_msi_init((____ptrval____), (____ptrval____), 12, 0x40b, (____ptrval____)) [ 0.290024] apcie_msi_init((____ptrval____), (____ptrval____), 13, 0x40c, (____ptrval____)) [ 0.290032] apcie_msi_init((____ptrval____), (____ptrval____), 14, 0x40d, (____ptrval____)) [ 0.290041] apcie_msi_init((____ptrval____), (____ptrval____), 15, 0x40e, (____ptrval____)) [ 0.290049] apcie_msi_init((____ptrval____), (____ptrval____), 16, 0x40f, (____ptrval____)) [ 0.290058] apcie_msi_init((____ptrval____), (____ptrval____), 17, 0x410, (____ptrval____)) [ 0.290066] apcie_msi_init((____ptrval____), (____ptrval____), 18, 0x411, (____ptrval____)) [ 0.290075] apcie_msi_init((____ptrval____), (____ptrval____), 19, 0x412, (____ptrval____)) [ 0.290083] apcie_msi_init((____ptrval____), (____ptrval____), 20, 0x413, (____ptrval____)) [ 0.290092] apcie_msi_init((____ptrval____), (____ptrval____), 21, 0x414, (____ptrval____)) [ 0.290100] apcie_msi_init((____ptrval____), (____ptrval____), 22, 0x415, (____ptrval____)) [ 0.290108] apcie_msi_init((____ptrval____), (____ptrval____), 23, 0x416, (____ptrval____)) [ 0.290129] aeolia_pcie 0000:00:14.4: irq_domain_alloc_irqs = 1 [ 0.290136] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23 [ 0.290143] aeolia_pcie 0000:00:14.4: dev->irq=1 [ 0.290167] apcie_irq_msi_compose_msg [ 0.290173] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 (____ptrval____) [ 0.290185] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3) [ 0.290196] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 0.290205] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c841c, b7ffff40) [ 0.290214] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84bc, fee00000) [ 0.290223] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84dc, 00000000) [ 0.290232] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c849c, 00000000) [ 0.290240] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c854c, 00000003) [ 0.290300] i2c i2c-0: adapter [icc] registered [ 0.307266] Freeing initrd memory: 4024K [ 0.316233] Turn ON BT/WLAN: ret=20, reply 00 00 00 00 [ 0.316323] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0 [ 0.356241] ret=46, reply 00 00 02 00 00 00 18 00 [ 0.361267] ret=20, reply 00 00 01 01 10 00 00 00 [ 0.366256] ret=20, reply 00 00 00 00 00 00 00 00 [ 0.366424] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information. [ 0.366433] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved. [ 0.366623] libphy: Fixed MDIO Bus: probed [ 0.366782] sky2: driver version 1.30 [ 0.366854] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1 [ 0.366911] sky2 0000:00:14.1: apcie_assign_irqs(1) (256) [ 0.366945] apcie_msi_init((____ptrval____), (____ptrval____), 24, 0x100, (____ptrval____)) [ 0.366961] sky2 0000:00:14.1: irq_domain_alloc_irqs = 18 [ 0.366967] sky2 0000:00:14.1: apcie_assign_irqs returning 1 [ 0.366985] apcie_irq_msi_compose_msg [ 0.366991] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 (____ptrval____) [ 0.367004] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 0.367016] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 0.367025] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 0.367034] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 0.367043] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 0.367051] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 0.367060] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 0.367324] sky2 0000:00:14.1 eth0: addr 0c:fe:45:8e:86:3b [ 0.367462] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3) (1792) [ 0.367510] apcie_msi_init((____ptrval____), (____ptrval____), 25, 0x700, (____ptrval____)) [ 0.367521] apcie_msi_init((____ptrval____), (____ptrval____), 26, 0x701, (____ptrval____)) [ 0.367530] apcie_msi_init((____ptrval____), (____ptrval____), 27, 0x702, (____ptrval____)) [ 0.367541] xhci_aeolia 0000:00:14.7: irq_domain_alloc_irqs = 19 [ 0.367548] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3 [ 0.367555] xhci_aeolia 0000:00:14.7: version 3.0 [ 0.367569] xhci_aeolia 0000:00:14.7: Belize SATA PHY init [ 1.367597] xhci_aeolia 0000:00:14.7: Belize SATA PHY Trace length : 6 [ 2.367673] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fa00e7d19, max_idle_ns: 440795227561 ns [ 2.367703] xhci_aeolia 0000:00:14.7: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl ATA mode [ 2.367720] xhci_aeolia 0000:00:14.7: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 2.367748] clocksource: Switched to clocksource tsc [ 2.367953] apcie_irq_msi_compose_msg [ 2.367961] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000019) mask=0x2 irq=26 hwirq=0x701 (____ptrval____) [ 2.367975] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 1, addr fee00000 data: 0x00000019 (25) [ 2.367987] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.367996] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.368005] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.368014] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.368023] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.368031] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c4, 00000019) [ 2.368286] scsi host0: ahci [ 2.368408] ata1: SATA max UDMA/133 abar m2097152@0xdc200000 port 0xdc200100 irq 26 [ 2.368424] xhci_aeolia_probe_one 0, controller is 90cf [ 2.368455] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.368471] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1 [ 2.368575] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x0000080000010010 [ 2.368594] apcie_irq_msi_compose_msg [ 2.368599] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 (____ptrval____) [ 2.368612] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24) [ 2.368623] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.368632] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.368641] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.368650] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.368659] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.368667] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c0, 00000018) [ 2.368689] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000 [ 2.368776] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.368787] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.368796] usb usb1: Product: xHCI Host Controller [ 2.368802] usb usb1: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.368808] usb usb1: SerialNumber: 0000:00:14.7 [ 2.368987] hub 1-0:1.0: USB hub found [ 2.369006] hub 1-0:1.0: 2 ports detected [ 2.369114] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.369125] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2 [ 2.369144] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 2.369174] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.369216] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.369226] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.369234] usb usb2: Product: xHCI Host Controller [ 2.369240] usb usb2: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.369246] usb usb2: SerialNumber: 0000:00:14.7 [ 2.369379] hub 2-0:1.0: USB hub found [ 2.369396] hub 2-0:1.0: 2 ports detected [ 2.370026] xhci_aeolia_probe_one 2, controller is 90cf [ 2.370052] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.370063] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3 [ 2.370160] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x0000080000010010 [ 2.370179] apcie_irq_msi_compose_msg [ 2.370183] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 (____ptrval____) [ 2.370196] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26) [ 2.370207] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.370216] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70) [ 2.370225] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000) [ 2.370233] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000) [ 2.370242] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000) [ 2.370251] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c8, 0000001a) [ 2.370274] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000 [ 2.370344] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.15 [ 2.370354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.370362] usb usb3: Product: xHCI Host Controller [ 2.370368] usb usb3: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.370374] usb usb3: SerialNumber: 0000:00:14.7 [ 2.370518] hub 3-0:1.0: USB hub found [ 2.370535] hub 3-0:1.0: 1 port detected [ 2.370623] xhci_aeolia 0000:00:14.7: xHCI Host Controller [ 2.370636] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4 [ 2.370647] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed [ 2.370675] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.370716] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.15 [ 2.370727] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.370735] usb usb4: Product: xHCI Host Controller [ 2.370740] usb usb4: Manufacturer: Linux 5.15.15 xhci-hcd [ 2.370746] usb usb4: SerialNumber: 0000:00:14.7 [ 2.370898] hub 4-0:1.0: USB hub found [ 2.370915] hub 4-0:1.0: 1 port detected [ 2.371118] usbcore: registered new interface driver uas [ 2.371169] usbcore: registered new interface driver usb-storage [ 2.371203] i8042: PNP: No PS/2 controller found. [ 2.371304] mousedev: PS/2 mouse device common for all mice [ 2.371395] usbcore: registered new interface driver xpad [ 2.371440] i2c_dev: i2c /dev entries driver [ 2.371493] i2c_dev: adapter [icc] registered as minor 0 [ 2.371507] i2c-core: driver [i2c-slave-eeprom] registered [ 2.371738] device-mapper: ioctl: 4.45.0-ioctl (2021-03-22) initialised: dm-devel@redhat.com [ 2.371765] sdhci: Secure Digital Host Controller Interface driver [ 2.371771] sdhci: Copyright(c) Pierre Ossman [ 2.371792] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0) [ 2.371831] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1) (768) [ 2.371857] apcie_msi_init((____ptrval____), (____ptrval____), 28, 0x300, (____ptrval____)) [ 2.371871] sdhci-pci 0000:00:14.3: irq_domain_alloc_irqs = 1c [ 2.371878] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1 [ 2.372167] apcie_irq_msi_compose_msg [ 2.372177] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 (____ptrval____) [ 2.372189] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27) [ 2.372200] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 2.372209] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8418, b7ffff30) [ 2.372218] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b8, fee00000) [ 2.372226] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d8, 00000000) [ 2.372235] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8498, 00000000) [ 2.372244] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8530, 0000001b) [ 2.372320] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA [ 2.372449] hid: raw HID events driver (C) Jiri Kosina

dmesg continued...... [ 2.372601] usbcore: registered new interface driver usbhid [ 2.372608] usbhid: USB HID core driver [ 2.372864] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq [ 2.373332] NET: Registered PF_INET6 protocol family [ 2.373865] Segment Routing with IPv6 [ 2.373886] In-situ OAM (IOAM) with IPv6 [ 2.373922] NET: Registered PF_PACKET protocol family [ 2.373998] Bluetooth: RFCOMM TTY layer initialized [ 2.374007] Bluetooth: RFCOMM socket layer initialized [ 2.374013] Bluetooth: RFCOMM ver 1.11 [ 2.374018] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.374023] Bluetooth: BNEP filters: protocol multicast [ 2.374035] Bluetooth: BNEP socket layer initialized [ 2.374040] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.374047] Bluetooth: HIDP socket layer initialized [ 2.374623] microcode: CPU0: patch_level=0x07013005 [ 2.374638] microcode: CPU1: patch_level=0x07013005 [ 2.374653] microcode: CPU2: patch_level=0x07013005 [ 2.374686] microcode: CPU3: patch_level=0x07013005 [ 2.374707] microcode: CPU4: patch_level=0x07013005 [ 2.374753] microcode: CPU5: patch_level=0x07013005 [ 2.374805] microcode: CPU6: patch_level=0x07013005 [ 2.374838] microcode: CPU7: patch_level=0x07013005 [ 2.374941] microcode: Microcode Update Driver: v2.2. [ 2.374949] IPI shorthand broadcast: enabled [ 2.374964] AVX version of gcm_enc/dec engaged. [ 2.375174] AES CTR mode by8 optimization enabled [ 2.376494] sched_clock: Marking stable (2226347719, 150126070)->(2385437673, -8963884) [ 2.376653] registered taskstats version 1 [ 2.376661] Loading compiled-in X.509 certificates [ 2.377226] amdgpu 0000:00:01.0: vgaarb: deactivate vga console [ 2.377336] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1 [ 2.377344] amdgpu 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq [ 2.377358] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9922 0x1002:0x9922 0x00). [ 2.377370] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported [ 2.377399] [drm] register mmio base: 0xE4800000 [ 2.377405] [drm] register mmio size: 262144 [ 2.377413] [drm] add ip block number 0 <cik_common> [ 2.377419] [drm] add ip block number 1 <gmc_v7_0> [ 2.377424] [drm] add ip block number 2 <cik_ih> [ 2.377430] [drm] add ip block number 3 <dce_v8_0> [ 2.377435] [drm] add ip block number 4 <gfx_v7_0> [ 2.377437] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2 [ 2.377445] [drm] add ip block number 5 <cik_sdma> [ 2.377476] ACPI Error: AE_BAD_PARAMETER, Thread 1076504896 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20210730/utmutex-252) [ 2.377491] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20210730/utmutex-289) [ 2.413248] [drm] BIOS signature incorrect 67 ca [ 2.413296] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR [ 2.413306] amdgpu: ATOM BIOS: 113-Starsha-005 [ 2.413421] i2c_dev: adapter [AMDGPU i2c bit bus 0x90] registered as minor 1 [ 2.413432] i2c i2c-1: adapter [AMDGPU i2c bit bus 0x90] registered [ 2.413441] i2c i2c-1: found normal entry for adapter 1, addr 0x50 [ 2.417164] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.425132] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.433130] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.441130] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7 [ 2.441134] i2c i2c-1: Used 4 tries to read from client at 0x50: failed, timeout? [ 2.441139] i2c i2c-1: NAK from device addr 0x50 msg #0 [ 2.445143] i2c i2c-1: found normal entry for adapter 1, addr 0x51 [ 2.449130] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.457130] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.465130] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.473130] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7 [ 2.473134] i2c i2c-1: Used 4 tries to read from client at 0x51: failed, timeout? [ 2.473138] i2c i2c-1: NAK from device addr 0x51 msg #0 [ 2.477142] i2c i2c-1: found normal entry for adapter 1, addr 0x52 [ 2.481130] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.485565] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.485606] mmc0: error -5 whilst initialising SDIO card [ 2.489130] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.497130] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.505130] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7 [ 2.505134] i2c i2c-1: Used 4 tries to read from client at 0x52: failed, timeout? [ 2.505138] i2c i2c-1: NAK from device addr 0x52 msg #0 [ 2.509142] i2c i2c-1: found normal entry for adapter 1, addr 0x53 [ 2.513130] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.521130] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.523176] usb usb3-port1: over-current condition [ 2.529130] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.537130] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7 [ 2.537133] i2c i2c-1: Used 4 tries to read from client at 0x53: failed, timeout? [ 2.537138] i2c i2c-1: NAK from device addr 0x53 msg #0 [ 2.541142] i2c i2c-1: found normal entry for adapter 1, addr 0x54 [ 2.545130] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.553130] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.561130] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.565679] random: fast init done [ 2.569130] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7 [ 2.569136] i2c i2c-1: Used 4 tries to read from client at 0x54: failed, timeout? [ 2.569140] i2c i2c-1: NAK from device addr 0x54 msg #0 [ 2.573150] i2c i2c-1: found normal entry for adapter 1, addr 0x55 [ 2.577130] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.585130] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.593130] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.601130] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7 [ 2.601134] i2c i2c-1: Used 4 tries to read from client at 0x55: failed, timeout? [ 2.601138] i2c i2c-1: NAK from device addr 0x55 msg #0 [ 2.605143] i2c i2c-1: found normal entry for adapter 1, addr 0x56 [ 2.608058] usb 1-1: new high-speed USB device number 2 using xhci_aeolia [ 2.609084] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.609147] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.609161] mmc0: error -5 whilst initialising SDIO card [ 2.617130] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.625130] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.633130] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7 [ 2.633134] i2c i2c-1: Used 4 tries to read from client at 0x56: failed, timeout? [ 2.633138] i2c i2c-1: NAK from device addr 0x56 msg #0 [ 2.637142] i2c i2c-1: found normal entry for adapter 1, addr 0x57 [ 2.641130] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.649130] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.657130] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.665130] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7 [ 2.665134] i2c i2c-1: Used 4 tries to read from client at 0x57: failed, timeout? [ 2.665138] i2c i2c-1: NAK from device addr 0x57 msg #0 [ 2.669219] i2c_dev: adapter [AMDGPU i2c bit bus 0x91] registered as minor 2 [ 2.669228] i2c i2c-2: adapter [AMDGPU i2c bit bus 0x91] registered [ 2.669234] i2c i2c-2: found normal entry for adapter 2, addr 0x50 [ 2.673130] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.681130] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.685163] usb usb4-port1: over-current condition [ 2.689130] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.697130] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7 [ 2.697134] i2c i2c-2: Used 4 tries to read from client at 0x50: failed, timeout? [ 2.697138] i2c i2c-2: NAK from device addr 0x50 msg #0 [ 2.701143] i2c i2c-2: found normal entry for adapter 2, addr 0x51 [ 2.705130] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.713130] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.721130] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.729130] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7 [ 2.729134] i2c i2c-2: Used 4 tries to read from client at 0x51: failed, timeout? [ 2.729138] i2c i2c-2: NAK from device addr 0x51 msg #0 [ 2.733142] i2c i2c-2: found normal entry for adapter 2, addr 0x52 [ 2.737130] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.744763] usb 1-1: New USB device found, idVendor=214b, idProduct=7250, bcdDevice= 1.00 [ 2.744776] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.744784] usb 1-1: Product: USB2.0 HUB [ 2.745130] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.746888] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.746936] mmc0: error -5 whilst initialising SDIO card [ 2.753131] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.761130] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7 [ 2.761134] i2c i2c-2: Used 4 tries to read from client at 0x52: failed, timeout? [ 2.761138] i2c i2c-2: NAK from device addr 0x52 msg #0 [ 2.765142] i2c i2c-2: found normal entry for adapter 2, addr 0x53 [ 2.769130] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.777130] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.785136] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.785192] hub 1-1:1.0: USB hub found [ 2.785241] hub 1-1:1.0: 4 ports detected [ 2.793130] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7 [ 2.793134] i2c i2c-2: Used 4 tries to read from client at 0x53: failed, timeout? [ 2.793138] i2c i2c-2: NAK from device addr 0x53 msg #0 [ 2.797142] i2c i2c-2: found normal entry for adapter 2, addr 0x54 [ 2.801130] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.809130] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.817130] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.825130] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7 [ 2.825134] i2c i2c-2: Used 4 tries to read from client at 0x54: failed, timeout? [ 2.825138] i2c i2c-2: NAK from device addr 0x54 msg #0 [ 2.829142] i2c i2c-2: found normal entry for adapter 2, addr 0x55 [ 2.829160] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.833130] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.835136] ata1.00: ATA-8: ST500LM012 HN-M500MBB, 2BA30014, max UDMA/133 [ 2.841130] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.849130] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.855197] usb 2-2: new SuperSpeed USB device number 2 using xhci_aeolia [ 2.857130] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7 [ 2.857134] i2c i2c-2: Used 4 tries to read from client at 0x55: failed, timeout? [ 2.857138] i2c i2c-2: NAK from device addr 0x55 msg #0 [ 2.861147] i2c i2c-2: found normal entry for adapter 2, addr 0x56 [ 2.865130] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.867805] usb 2-2: New USB device found, idVendor=0781, idProduct=5591, bcdDevice= 1.00 [ 2.867819] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.867827] usb 2-2: Product: Ultra USB 3.0 [ 2.867833] usb 2-2: Manufacturer: SanDisk [ 2.867839] usb 2-2: SerialNumber: 010114902323d954b2e61624fac2be9cee21308433fc2f9132cd345d140253b6efab000000000000000000009e13ff4a00071800915581075328119a [ 2.868218] usb-storage 2-2:1.0: USB Mass Storage device detected [ 2.868564] scsi host1: usb-storage 2-2:1.0 [ 2.873130] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.881130] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.889130] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7 [ 2.889134] i2c i2c-2: Used 4 tries to read from client at 0x56: failed, timeout? [ 2.889138] i2c i2c-2: NAK from device addr 0x56 msg #0 [ 2.893142] i2c i2c-2: found normal entry for adapter 2, addr 0x57 [ 2.897131] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.905130] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.913130] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.921130] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7 [ 2.921134] i2c i2c-2: Used 4 tries to read from client at 0x57: failed, timeout? [ 2.921138] i2c i2c-2: NAK from device addr 0x57 msg #0 [ 2.925182] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit [ 2.925197] amdgpu 0000:00:01.0: amdgpu: VRAM: 1024M 0x0000000F00000000 - 0x0000000F3FFFFFFF (1024M used) [ 2.925209] amdgpu 0000:00:01.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF [ 2.925226] [drm] Detected VRAM RAM=1024M, BAR=1024M [ 2.925232] [drm] RAM width 64bits UNKNOWN [ 2.925280] [drm] amdgpu: 1024M of VRAM memory ready [ 2.925287] [drm] amdgpu: 3072M of GTT memory ready. [ 2.925297] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.925307] amdgpu 0000:00:01.0: amdgpu: Done gart [ 2.925318] amdgpu 0000:00:01.0: amdgpu: Done init [ 2.925349] [drm] PCIE GART of 512M enabled (table at 0x0000000F0004B000). [ 2.925911] [drm] AMDGPU Display Connectors [ 2.925918] [drm] Connector 0: [ 2.925922] [drm] HDMI-A-1 [ 2.925926] [drm] HPD1 [ 2.925930] [drm] DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f [ 2.925939] [drm] Encoders: [ 2.925943] [drm] DFP1: INTERNAL_UNIPHY [ 2.927503] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.927625] mmc0: error -84 whilst initialising SDIO card [ 2.930873] amdgpu 0000:00:01.0: amdgpu: SE 2, SH per SE 1, CU per SH 9, active_cu_number 18 [ 2.955965] amdgpu: ps4_bridge_get_modes [ 2.956018] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 2.956581] [drm] fb mappable at 0x100167000 [ 2.956589] [drm] vram apper at 0x100000000 [ 2.956593] [drm] size 8294400 [ 2.956597] [drm] fb depth is 24 [ 2.956601] [drm] pitch is 7680 [ 2.957314] fbcon: amdgpudrmfb (fb0) is primary device [ 2.960954] amdgpu: ps4_bridge_get_modes [ 2.960983] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 2.990830] [drm:0xffffffff815ec568] *ERROR* clock recovery tried 5 times [ 2.990840] [drm:0xffffffff815ec507] *ERROR* clock recovery failed [ 3.069233] usb 1-1.3: new low-speed USB device number 3 using xhci_aeolia [ 3.148895] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=604a, bcdDevice= 1.00 [ 3.148905] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.148909] usb 1-1.3: Product: HP USB Optical Mouse [ 3.148913] usb 1-1.3: Manufacturer: PixArt [ 3.203147] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:604A.0001/input/input3 [ 3.203372] hid-generic 0003:03F0:604A.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.7-1.3/input0 [ 3.267233] usb 1-1.4: new low-speed USB device number 4 using xhci_aeolia [ 3.350200] usb 1-1.4: New USB device found, idVendor=413c, idProduct=2003, bcdDevice= 3.06 [ 3.350211] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.350215] usb 1-1.4: Product: Dell USB Keyboard [ 3.350218] usb 1-1.4: Manufacturer: Dell [ 3.397270] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.4/1-1.4:1.0/0003:413C:2003.0002/input/input4 [ 3.449550] hid-generic 0003:413C:2003.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:14.7-1.4/input0 [ 3.782736] ata1.00: ATA Identify Device Log not supported [ 3.782748] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.789983] ata1.00: ATA Identify Device Log not supported [ 3.789998] ata1.00: configured for UDMA/133 [ 3.790206] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0014 PQ: 0 ANSI: 5 [ 3.790491] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.790724] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 3.790733] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.790752] sd 0:0:0:0: [sda] Write Protect is off [ 3.790758] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.790788] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.893942] scsi 1:0:0:0: Direct-Access SanDisk Ultra USB 3.0 1.00 PQ: 0 ANSI: 6 [ 3.894269] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.894389] sd 1:0:0:0: [sdb] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [ 3.895158] sd 1:0:0:0: [sdb] Write Protect is off [ 3.895163] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 3.895438] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 3.899372] sdb: sdb1 sdb2 [ 3.901045] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 4.048969] Console: switching to colour frame buffer device 240x67 [ 4.064055] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device [ 4.064495] i2c_dev: adapter [card0-HDMI-A-1] registered as minor 3 [ 4.064508] i2c i2c-3: adapter [card0-HDMI-A-1] registered [ 4.064517] i2c i2c-3: found normal entry for adapter 3, addr 0x50 [ 4.065015] i2c i2c-3: Creating eeprom at 0x50 [ 4.065043] eeprom 3-0050: probe [ 4.065049] eeprom 3-0050: eeprom driver is deprecated, please use at24 instead [ 4.065152] i2c i2c-3: client [eeprom] registered with bus id 3-0050 [ 4.065156] i2c i2c-3: found normal entry for adapter 3, addr 0x51 [ 4.065468] i2c i2c-3: found normal entry for adapter 3, addr 0x52 [ 4.065777] i2c i2c-3: found normal entry for adapter 3, addr 0x53 [ 4.066086] i2c i2c-3: found normal entry for adapter 3, addr 0x54 [ 4.066397] i2c i2c-3: found normal entry for adapter 3, addr 0x55 [ 4.066707] i2c i2c-3: found normal entry for adapter 3, addr 0x56 [ 4.067016] i2c i2c-3: found normal entry for adapter 3, addr 0x57 [ 4.067339] [drm] Initialized amdgpu 3.42.0 20150101 for 0000:00:01.0 on minor 0 [ 4.067419] [drm:0xffffffff816003e6] *ERROR* unable to create amdgpu_preempt_ib debugsfs file [ 4.067503] [drm:0xffffffff815cc17d] *ERROR* Creating debugfs files failed (-1). [ 4.067633] ahci 0000:00:14.2: version 3.0 [ 4.067696] ahci 0000:00:14.2: apcie_assign_irqs(1) (512) [ 4.071207] apcie_msi_init((____ptrval____), (____ptrval____), 31, 0x200, (____ptrval____)) [ 4.074727] ahci 0000:00:14.2: irq_domain_alloc_irqs = 1f [ 4.078261] ahci 0000:00:14.2: apcie_assign_irqs returning 1 [ 4.081788] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode [ 4.085328] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs [ 4.088945] apcie_irq_msi_compose_msg [ 4.092509] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001e) mask=0x1 irq=31 hwirq=0x200 (____ptrval____) [ 4.096220] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001e (30) [ 4.099938] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 4.103646] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8414, b7ffff20) [ 4.107344] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b4, fee00000) [ 4.111031] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d4, 00000000) [ 4.114681] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8494, 00000000) [ 4.118294] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8520, 0000001e) [ 4.122303] scsi host2: ahci [ 4.125955] ata2: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31 [ 4.129657] printk: console [netcon0] enabled [ 4.133232] netconsole: network logging started [ 4.136872] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.141881] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.145509] ALSA device list: [ 4.149112] #0: HD-Audio Generic at 0xe4840000 irq 29 [ 4.159071] sda: sda1 sda3 sda5 sda7 sda9 sda10 sda11 sda12 sda13 sda17 sda19 sda25 sda27 sda29 sda31 [ 4.163978] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 4.597230] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.601549] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 9.845183] ata2.00: qc timeout (cmd 0xa1) [ 9.848995] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 10.325227] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 10.329581] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 20.597184] ata2.00: qc timeout (cmd 0xa1) [ 20.601083] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 20.604954] ata2: limiting SATA link speed to 1.5 Gbps [ 21.077230] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 21.081619] aeolia_pcie 0000:00:14.4: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0001 address=0xfdf81e0000 flags=0x0008] [ 51.317239] ata2.00: qc timeout (cmd 0xa1) [ 51.321067] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4) [ 51.797231] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310) [ 51.801588] Freeing unused kernel image (initmem) memory: 936K [ 51.805417] Write protecting the kernel read-only data: 24576k [ 51.810247] Freeing unused kernel image (text/rodata gap) memory: 2044K [ 51.814666] Freeing unused kernel image (rodata/data gap) memory: 1372K [ 51.818371] rodata_test: all tests were successful [ 51.821996] Run /init as init process [ 51.825583] with arguments: [ 51.825584] /init [ 51.825586] with environment: [ 51.825587] HOME=/ [ 51.825589] TERM=linux [ 60.321628] random: crng init done [ 60.654897] EXT4-fs (sdb2): warning: mounting unchecked fs, running e2fsck is recommended [ 60.657842] EXT4-fs (sdb2): mounted filesystem without journal. Opts: (null). Quota mode: disabled. [ 63.288659] usb 1-1.3: USB disconnect, device number 3 [ 64.256488] systemd[1]: System time before build time, advancing clock. [ 64.368886] systemd[1]: systemd 248.3-1ubuntu8.2 running in system mode. (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS -OPENSSL +ACL +BLKID +CURL +ELFUTILS -FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP -LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 64.380225] systemd[1]: Detected architecture x86-64. [ 64.402596] systemd[1]: Hostname set to <ITmania-PS4>. [ 64.996235] usb 1-1.3: new low-speed USB device number 5 using xhci_aeolia [ 65.075671] usb 1-1.3: New USB device found, idVendor=03f0, idProduct=604a, bcdDevice= 1.00 [ 65.075684] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 65.075688] usb 1-1.3: Product: HP USB Optical Mouse [ 65.075692] usb 1-1.3: Manufacturer: PixArt [ 65.114143] input: PixArt HP USB Optical Mouse as /devices/pci0000:00/0000:00:14.7/usb1/1-1/1-1.3/1-1.3:1.0/0003:03F0:604A.0003/input/input5 [ 65.114415] hid-generic 0003:03F0:604A.0003: input,hidraw0: USB HID v1.11 Mouse [PixArt HP USB Optical Mouse] on usb-0000:00:14.7-1.3/input0 [ 66.246884] systemd[1]: /etc/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid â\x86\x92 /run/teamviewerd.pid; please update the unit file accordingly. [ 66.324073] systemd[1]: Queued start job for default target Graphical Interface. [ 66.326339] systemd[1]: Created slice system-modprobe.slice. [ 66.327065] systemd[1]: Created slice User and Session Slice. [ 66.327373] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 66.327916] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 66.328225] systemd[1]: Reached target User and Group Name Lookups. [ 66.328400] systemd[1]: Reached target Remote File Systems. [ 66.328568] systemd[1]: Reached target Slices. [ 66.328769] systemd[1]: Reached target Local Verity Integrity Protected Volumes. [ 66.329115] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 66.329493] systemd[1]: Listening on LVM2 poll daemon socket. [ 66.339270] systemd[1]: Listening on Syslog Socket. [ 66.339775] systemd[1]: Listening on fsck to fsckd communication Socket. [ 66.340055] systemd[1]: Listening on initctl Compatibility Named Pipe. [ 66.340642] systemd[1]: Listening on Journal Audit Socket. [ 66.340968] systemd[1]: Listening on Journal Socket (/dev/log). [ 66.341378] systemd[1]: Listening on Journal Socket. [ 66.342845] systemd[1]: Listening on udev Control Socket. [ 66.343200] systemd[1]: Listening on udev Kernel Socket. [ 66.344840] systemd[1]: Mounting Huge Pages File System... [ 66.346711] systemd[1]: Mounting POSIX Message Queue File System... [ 66.347234] systemd[1]: Condition check resulted in Kernel Debug File System being skipped. [ 66.347454] systemd[1]: Condition check resulted in Kernel Trace File System being skipped. [ 66.347787] systemd[1]: systemd-journald.service: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling. [ 66.347794] systemd[1]: (This warning is only shown for the first unit using IP firewalling.) [ 66.349165] systemd[1]: Starting Journal Service... [ 66.349814] systemd[1]: Finished Availability of block devices. [ 66.352145] systemd[1]: Starting Set the console keyboard layout... [ 66.352449] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped. [ 66.354023] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 66.355952] systemd[1]: Starting Load Kernel Module configfs... [ 66.358114] systemd[1]: Starting Load Kernel Module drm... [ 66.360306] systemd[1]: Starting Load Kernel Module fuse... [ 66.373685] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [ 66.373808] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 66.399499] systemd[1]: Starting Load Kernel Modules... [ 66.401787] systemd[1]: Starting Remount Root and Kernel File Systems... [ 66.404100] systemd[1]: Starting Coldplug All udev Devices... [ 66.406264] systemd[1]: Starting Uncomplicated firewall... [ 66.410645] systemd[1]: Mounted Huge Pages File System. [ 66.411085] systemd[1]: Mounted POSIX Message Queue File System. [ 66.411754] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 66.412228] systemd[1]: Finished Load Kernel Module configfs. [ 66.413056] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 66.413508] systemd[1]: Finished Load Kernel Module drm. [ 66.414328] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 66.414781] systemd[1]: Finished Load Kernel Module fuse. [ 66.417006] systemd[1]: Mounting FUSE Control File System... [ 66.418890] systemd[1]: Mounting Kernel Configuration File System... [ 66.421475] systemd[1]: Mounted FUSE Control File System. [ 66.423170] systemd[1]: Mounted Kernel Configuration File System. [ 66.461765] systemd[1]: Finished Uncomplicated firewall. [ 66.473509] systemd[1]: Finished Load Kernel Modules. [ 66.475564] systemd[1]: Starting Apply Kernel Variables... [ 66.516290] systemd[1]: Finished Apply Kernel Variables. [ 66.523734] systemd[1]: Started Journal Service. [ 67.804533] Adding 524284k swap on /swapfile. Priority:-2 extents:29 across:1785852k FS [ 67.809916] systemd-journald[287]: Received client request to flush runtime journal. [ 67.862536] systemd-journald[287]: File /var/log/journal/10ad53ab65fd48e59aa1af28b2b6870c/system.journal corrupted or uncleanly shut down, renaming and replacing. [ 68.976200] sky2 0000:00:14.1 enp0s20f1: renamed from eth0 [ 74.530395] apcie_irq_msi_compose_msg [ 74.532864] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 0000000060f768f9 [ 74.532875] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 74.532883] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 74.532888] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 74.532892] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 74.532896] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 74.532901] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 74.532905] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 74.533244] sky2 0000:00:14.1 enp0s20f1: enabling interface [ 75.000331] loop0: detected capacity change from 0 to 8 [ 75.531175] systemd-journald[287]: Failed to read journal file /var/log/journal/10ad53ab65fd48e59aa1af28b2b6870c/user-1001.journal for rotation, trying to move it out of the way: Text file busy [ 78.275088] amdgpu: ps4_bridge_get_modes [ 78.275111] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 78.280161] amdgpu: ps4_bridge_get_modes [ 78.280186] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 96.402596] amdgpu: ps4_bridge_get_modes [ 96.402624] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 96.412518] amdgpu: ps4_bridge_get_modes [ 96.412539] [drm] Got built-in EDID base block and 0 extensions from "edid/1920x1080.bin" for connector "HDMI-A-1" [ 98.155625] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 136.336435] mwlwifi: loading out-of-tree module taints kernel. [ 256.455538] sky2 0000:00:14.1 enp0s20f1: disabling interface [ 260.679513] apcie_irq_msi_compose_msg [ 260.679529] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 0000000060f768f9 [ 260.679540] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23) [ 260.679548] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff) [ 260.679553] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10) [ 260.679557] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000) [ 260.679561] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000) [ 260.679565] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000) [ 260.679569] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017) [ 260.679830] sky2 0000:00:14.1 enp0s20f1: enabling interface

noob404 noob but the deb is a patch for the bzimage? or simply add the module to the right directory? i need to understand how bzimage works.. every boot it be decompressed to the right linux folder? i have torus 2.0 on my ps4 fat. and latest fedora sometimes have wifi and bt sometimes not

Naxil Can you share two different dmesgs of when you have WiFi and when not.

joesnose [ 2.927503] mmc0: Tuning failed, falling back to fixed sampling clock [ 2.927625] mmc0: error -84 whilst initialising SDIO card` Yeah. Tuning failed. Mircoho pointed out to me that this might be a ps4 payload error. Some payloads include baikal patches that could be the cause of this. Try using a few different payloads and seeing if this tuning error still happens.

Reo_Auin You suspected the same as well. Remember, we tried changing the clocksource type? But, I hadn't considered the Baikal patches that could be interfering.

PS4 Phat WiFi Fix Test - Marvell 8897 Torus 2.0: Page 2 - PS4Linux Forums | PS4 Linux Distros, Windows Gaming, and more

PS4 Phat WiFi Fix Test - Marvell 8897 Torus 2.0

Random-Kafk

noob404 Mhmm, I am very busy with life stuff too (hence the late reply lol), and am at an impasse with this issue. So the more heads the better. Good luck with the real life things!

crashniels

Random-Kafk Hi. We haven't tested newer wifi chipsets but we have fixed the mmc0 error. We are on the ps4gentoo discord and the code is on my repo.

Random-Kafk

crashniels The [ 2.927503] mmc0: Tuning failed, falling back to fixed sampling clock error?
Well that's a great start. I checked out your repo. I tried out a 6.12 release some time ago but my model still had the issues.
Is it this recent commit with this fix?

If you can tell me the branch or commit to test (or more conveniently a precompiled), I'd love to test.

Random-Kafk

crashniels Nice work on the kernel. It no longer seems to have the ATA IDENTIFY error on internal use which I think was fixed upstream after Linux 5.15.

However the mmc
mmc0: Tuning failed, falling back to fixed sampling clock
mmc0: error -84 whilst initialising SDIO card
errors still persist for me on the 6.15 build:

[    0.000000] ps4: x86_ps4_early_setup: PS4 early setup
[    0.000000] Linux version 6.15.5-gentoo (root@ps4) (gcc (Gentoo 14.3.0 p8) 14.3.0, GNU ld (Gentoo 2.44 p1) 2.44.0) #1 SMP Wed Jul  9 22:08:14 -00 2025
[    0.000000] Command line: initcall_blacklist=hid_sony log_buf_len=9M panic=0 clocksource=tsc net.ifnames=0 console=tty0,tty1,tty2 drm.debug=0 iommu=pt vfio_iommu_type1.allow_unsafe_interrupts=1 consoleblank=0 video=HDMI-A-1:1920x1080
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000180000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] ps4: EMC timer started in 20013 TSC ticks
[    0.000000] ps4: Calibrated TSC frequency: 1593804544 kHz
[    0.000000] tsc: Detected 1593.805 MHz processor
[    0.001318] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001324] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001338] last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.001349] MTRR map: 6 entries (3 fixed + 3 variable; max 20), built from 9 variable MTRRs
[    0.001352] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001774] e820: update [mem 0x80000000-0x17fffffff] usable ==> reserved
[    0.001788] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.009855] Using GB pages for direct mapping
[    0.039732] printk: log buffer data + meta data: 16777216 + 58720256 = 75497472 bytes
[    0.039739] printk: early log buf free: 63072(96%)
[    0.039743] RAMDISK: [mem 0x4d800000-0x4debbfff]
[    0.039762] ACPI: Early table checksum verification disabled
[    0.039770] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE   )
[    0.039779] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE    ORBIS    20121218 INTL 20110211)
[    0.039790] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE    ORBIS    20130205 INTL 20110211)
[    0.039801] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE    ORBIS    20121002 INTL 20110211)
[    0.039807] ACPI: FACS 0x00000000000E012C 000040
[    0.039812] ACPI: FACS 0x00000000000E012C 000040
[    0.039817] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE    ORBIS    20120725 INTL 20110211)
[    0.039823] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE    ORBIS    20120725 INTL 20110211)
[    0.039829] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.039835] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F    PS4KEXEC 20161225 KEXC 20161225)
[    0.039840] ACPI: Reserving FACP table memory at [mem 0xe016c-0xe025f]
[    0.039844] ACPI: Reserving DSDT table memory at [mem 0xe0430-0xe05bb]
[    0.039846] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b]
[    0.039848] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b]
[    0.039850] ACPI: Reserving APIC table memory at [mem 0xe0298-0xe0303]
[    0.039852] ACPI: Reserving MCFG table memory at [mem 0xe0304-0xe033f]
[    0.039854] ACPI: Reserving SSDT table memory at [mem 0xe0730-0xe2073]
[    0.039855] ACPI: Reserving IVRS table memory at [mem 0xe2074-0xe20c7]
[    0.039905] Zone ranges:
[    0.039907]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.039911]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.039915]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.039918] Movable zone start for each node
[    0.039919] Early memory node ranges
[    0.039920]   node   0: [mem 0x0000000000001000-0x0000000000007fff]
[    0.039923]   node   0: [mem 0x0000000000080000-0x0000000000099fff]
[    0.039925]   node   0: [mem 0x0000000000100000-0x00000000003fffff]
[    0.039928]   node   0: [mem 0x0000000000480000-0x000000000067ffff]
[    0.039930]   node   0: [mem 0x0000000000700000-0x000000007efe7fff]
[    0.039932]   node   0: [mem 0x000000007f000000-0x000000007fffffff]
[    0.039934]   node   0: [mem 0x0000000180000000-0x000000027effffff]
[    0.039938] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.039947] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.039953] On node 0, zone DMA: 120 pages in unavailable ranges
[    0.039975] On node 0, zone DMA: 102 pages in unavailable ranges
[    0.039991] On node 0, zone DMA: 128 pages in unavailable ranges
[    0.040042] On node 0, zone DMA: 128 pages in unavailable ranges
[    0.050322] On node 0, zone DMA32: 24 pages in unavailable ranges
[    0.071124] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.071815] ACPI: No IOAPIC entries present
[    0.071817] ACPI: Using ACPI for processor (LAPIC) configuration information
[    0.071832] CPU topo: Max. logical packages:   1
[    0.071833] CPU topo: Max. logical dies:       1
[    0.071835] CPU topo: Max. dies per package:   1
[    0.071847] CPU topo: Max. threads per core:   1
[    0.071849] CPU topo: Num. cores per package:     8
[    0.071850] CPU topo: Num. threads per package:   8
[    0.071852] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.071878] [mem 0xfc000000-0xffffffff] available for PCI devices
[    0.071884] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.085135] setup_percpu: NR_CPUS:9 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.085791] percpu: Embedded 41 pages/cpu s129112 r8192 d30632 u262144
[    0.085812] pcpu-alloc: s129112 r8192 d30632 u262144 alloc=1*2097152
[    0.085818] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.085853] Kernel command line: initcall_blacklist=hid_sony log_buf_len=9M panic=0 clocksource=tsc net.ifnames=0 console=tty0,tty1,tty2 drm.debug=0 n iommu=pt vfio_iommu_type1.allow_unsafe_interrupts=1 consoleblank=0 video=HDMI-A-1:1920x1080
[    0.085881] blacklisting initcall hid_sony
[    0.087824] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.088733] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.088821] software IO TLB: area num 8.
[    0.117634] Built 1 zonelists, mobility grouping on.  Total pages: 1568265
[    0.117648] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    0.148053] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.148244] rcu: Hierarchical RCU implementation.
[    0.148246] rcu: 	RCU restricting CPUs from NR_CPUS=9 to nr_cpu_ids=8.
[    0.148250] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.148252] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.148277] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0
[    0.148338] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.148395] call_irq_handler: 0.49 No irq handler for vector
[    0.148428] Console: colour dummy device 80x25
[    0.148436] printk: legacy console [tty0] enabled
[    0.148840] ACPI: Core revision 20240827
[    0.148915] ACPI: setting ELCR to 0200 (from ffff)
[    0.148936] Failed to register legacy timer interrupt
[    0.148941] APIC: Switch to symmetric I/O mode setup
[    0.148975] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.149092] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x16f948e071b, max_idle_ns: 440795275880 ns
[    0.149116] Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.61 BogoMIPS (lpj=1593805)
[    0.149166] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.149174] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.149192] Speculative Store Bypass: Vulnerable
[    0.149206] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.149214] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.149220] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.149227] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.149235] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.150107] Freeing SMP alternatives memory: 52K
[    0.150107] pid_max: default: 32768 minimum: 301
[    0.150107] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.150107] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.150107] smpboot: CPU0: AMD DG1101SKF84HV (family: 0x16, model: 0x13, stepping: 0x1)
[    0.150107] Performance Events: AMD PMU driver.
[    0.150107] ... version:                0
[    0.150107] ... bit width:              48
[    0.150107] ... generic registers:      4
[    0.150107] ... value mask:             0000ffffffffffff
[    0.150107] ... max period:             00007fffffffffff
[    0.150107] ... fixed-purpose events:   0
[    0.150107] ... event mask:             000000000000000f
[    0.150107] signal: max sigframe size: 1776
[    0.150107] rcu: Hierarchical SRCU implementation.
[    0.150107] rcu: 	Max phase no-delay instances is 400.
[    0.150107] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.150231] smp: Bringing up secondary CPUs ...
[    0.150470] smpboot: x86: Booting SMP configuration:
[    0.150478] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.160206] smp: Brought up 1 node, 8 CPUs
[    0.160228] smpboot: Total of 8 processors activated (25500.88 BogoMIPS)
[    0.161289] Memory: 5976796K/6273060K available (16633K kernel code, 826K rwdata, 5900K rodata, 908K init, 1224K bss, 291768K reserved, 0K cma-reserved)
[    0.162214] devtmpfs: initialized
[    0.162692] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.162692] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.162692] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.163197] prandom: seed boundary self test passed
[    0.164380] prandom: 100 self tests passed
[    0.164636] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.164739] audit: initializing netlink subsys (disabled)
[    0.164788] audit: type=2000 audit(0.015:1): state=initialized audit_enabled=0 res=1
[    0.164788] thermal_sys: Registered thermal governor 'step_wise'
[    0.165272] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.165293] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.165316] PCI: Using configuration type 1 for base access
[    0.165514] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2
[    0.165514] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.165514] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.166211] cryptd: max_cpu_qlen set to 1000
[    0.183110] raid6: sse2x4   gen()  3971 MB/s
[    0.200111] raid6: sse2x2   gen()  4038 MB/s
[    0.217112] raid6: sse2x1   gen()  3196 MB/s
[    0.217120] raid6: using algorithm sse2x2 gen() 4038 MB/s
[    0.234112] raid6: .... xor() 2596 MB/s, rmw enabled
[    0.234119] raid6: using ssse3x2 recovery algorithm
[    0.234201] ACPI: Added _OSI(Module Device)
[    0.234209] ACPI: Added _OSI(Processor Device)
[    0.234215] ACPI: Added _OSI(Processor Aggregator Device)
[    0.235621] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.235899] ACPI: OSL: SCI (IRQ9) allocation failed
[    0.235907] ACPI Error: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20240827/evevent-96)
[    0.235920] ACPI: Unable to start the ACPI Interpreter
[    0.235927] ACPI Error: Could not remove SCI handler (20240827/evmisc-251)
[    0.236237] iommu: Default domain type: Passthrough (set via kernel command line)
[    0.236401] SCSI subsystem initialized
[    0.236424] libata version 3.00 loaded.
[    0.236510] usbcore: registered new interface driver usbfs
[    0.236533] usbcore: registered new interface driver hub
[    0.236559] usbcore: registered new device driver usb
[    0.236681] Advanced Linux Sound Architecture Driver Initialized.
[    0.236896] Bluetooth: Core ver 2.22
[    0.236917] NET: Registered PF_BLUETOOTH protocol family
[    0.236924] Bluetooth: HCI device and connection manager initialized
[    0.236933] Bluetooth: HCI socket layer initialized
[    0.236941] Bluetooth: L2CAP socket layer initialized
[    0.236952] Bluetooth: SCO socket layer initialized
[    0.237144] PCI: Probing PCI hardware
[    0.237152] PCI: root bus 00: using default resources
[    0.237156] PCI: Probing PCI hardware (bus 00)
[    0.237185] PCI host bridge to bus 0000:00
[    0.237194] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.237204] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[    0.237213] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.237237] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000 conventional PCI endpoint
[    0.237338] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600 conventional PCI endpoint
[    0.237439] pci 0000:00:01.0: [1002:9922] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.237469] pci 0000:00:01.0: BAR 0 [mem 0xe0000000-0xe3ffffff 64bit pref]
[    0.237480] pci 0000:00:01.0: BAR 2 [mem 0xe4000000-0xe47fffff 64bit pref]
[    0.237489] pci 0000:00:01.0: BAR 4 [io  0x6000-0x60ff]
[    0.237498] pci 0000:00:01.0: BAR 5 [mem 0xe4800000-0xe483ffff]
[    0.237507] pci 0000:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]
[    0.237520] pci 0000:00:01.0: enabling Extended Tags
[    0.237535] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.237562] pci 0000:00:01.0: supports D1 D2
[    0.237569] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.237643] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.237672] pci 0000:00:01.1: BAR 0 [mem 0xe4840000-0xe4843fff 64bit]
[    0.237686] pci 0000:00:01.1: enabling Extended Tags
[    0.237713] pci 0000:00:01.1: supports D1 D2
[    0.237782] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000 conventional PCI endpoint
[    0.237881] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000 PCIe Endpoint
[    0.237920] pci 0000:00:14.0: BAR 0 [mem 0xfdf8000000-0xfdf9ffffff 64bit]
[    0.237930] pci 0000:00:14.0: BAR 2 [io  0x1000-0x10ff]
[    0.237942] pci 0000:00:14.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.237991] pci 0000:00:14.0: supports D1
[    0.237998] pci 0000:00:14.0: PME# supported from D0 D1 D3hot
[    0.238083] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001 PCIe Endpoint
[    0.238132] pci 0000:00:14.1: BAR 0 [mem 0xc4000000-0xc4003fff 64bit]
[    0.238146] pci 0000:00:14.1: ROM [mem 0x00000000-0x0000ffff pref]
[    0.238191] pci 0000:00:14.1: supports D1
[    0.238198] pci 0000:00:14.1: PME# supported from D0 D1 D3hot
[    0.238278] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002 PCIe Endpoint
[    0.238317] pci 0000:00:14.2: BAR 0 [mem 0xc8000000-0xc8000fff 64bit]
[    0.238330] pci 0000:00:14.2: BAR 5 [mem 0xc8001000-0xc8001fff]
[    0.238339] pci 0000:00:14.2: ROM [mem 0x00000000-0x0000ffff pref]
[    0.238383] pci 0000:00:14.2: supports D1
[    0.238390] pci 0000:00:14.2: PME# supported from D0 D1 D3hot
[    0.238470] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003 PCIe Endpoint
[    0.238509] pci 0000:00:14.3: BAR 0 [mem 0xcc000000-0xcc000fff 64bit]
[    0.238522] pci 0000:00:14.3: ROM [mem 0x00000000-0x00000fff pref]
[    0.238566] pci 0000:00:14.3: supports D1
[    0.238572] pci 0000:00:14.3: PME# supported from D0 D1 D3hot
[    0.238652] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004 PCIe Endpoint
[    0.238691] pci 0000:00:14.4: BAR 0 [mem 0xd0000000-0xd00fffff 64bit]
[    0.238701] pci 0000:00:14.4: BAR 2 [mem 0xd0100000-0xd0107fff 64bit]
[    0.238711] pci 0000:00:14.4: BAR 4 [mem 0xd0200000-0xd03fffff 64bit]
[    0.238720] pci 0000:00:14.4: ROM [mem 0x00000000-0x0000ffff pref]
[    0.238764] pci 0000:00:14.4: supports D1
[    0.238771] pci 0000:00:14.4: PME# supported from D0 D1 D3hot
[    0.238849] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005 PCIe Endpoint
[    0.238887] pci 0000:00:14.5: BAR 0 [mem 0xd4000000-0xd4000fff 64bit]
[    0.238898] pci 0000:00:14.5: BAR 2 [mem 0xd4001000-0xd4001fff 64bit]
[    0.238908] pci 0000:00:14.5: ROM [mem 0x00000000-0x0000ffff pref]
[    0.238952] pci 0000:00:14.5: supports D1
[    0.238958] pci 0000:00:14.5: PME# supported from D0 D1 D3hot
[    0.239037] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006 PCIe Endpoint
[    0.239076] pci 0000:00:14.6: BAR 0 [mem 0xd8000000-0xd8000fff 64bit]
[    0.239086] pci 0000:00:14.6: BAR 2 [mem 0x80000000-0xbfffffff 64bit]
[    0.239095] pci 0000:00:14.6: BAR 4 [mem 0xd9100000-0xd91fffff]
[    0.239112] pci 0000:00:14.6: BAR 5 [mem 0xd9000000-0xd903ffff]
[    0.239121] pci 0000:00:14.6: ROM [mem 0x00000000-0x0000ffff pref]
[    0.239165] pci 0000:00:14.6: supports D1
[    0.239171] pci 0000:00:14.6: PME# supported from D0 D1 D3hot
[    0.239250] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007 PCIe Endpoint
[    0.239289] pci 0000:00:14.7: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[    0.239299] pci 0000:00:14.7: BAR 2 [mem 0xdc200000-0xdc3fffff 64bit]
[    0.239309] pci 0000:00:14.7: BAR 4 [mem 0xdc400000-0xdc5fffff 64bit]
[    0.239318] pci 0000:00:14.7: ROM [mem 0x00000000-0x0000ffff pref]
[    0.239362] pci 0000:00:14.7: supports D1
[    0.239368] pci 0000:00:14.7: PME# supported from D0 D1 D3hot
[    0.239441] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000 conventional PCI endpoint
[    0.239519] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000 conventional PCI endpoint
[    0.239594] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000 conventional PCI endpoint
[    0.239668] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000 conventional PCI endpoint
[    0.239748] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000 conventional PCI endpoint
[    0.239819] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000 conventional PCI endpoint
[    0.239895] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.241634] PCI: pci_cache_line_size set to 64 bytes
[    0.241670] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff]
[    0.241675] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[    0.241679] e820: reserve RAM buffer [mem 0x00680000-0x006fffff]
[    0.241682] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff]
[    0.241685] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.241869] clocksource: Switched to clocksource tsc-early
[    0.241869] pnp: PnP ACPI: disabled
[    0.245487] NET: Registered PF_INET protocol family
[    0.245798] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.249739] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.249777] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.249794] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.250037] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.250723] TCP: Hash tables configured (established 65536 bind 65536)
[    0.250872] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.251000] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.251178] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.251455] RPC: Registered named UNIX socket transport module.
[    0.251464] RPC: Registered udp transport module.
[    0.251470] RPC: Registered tcp transport module.
[    0.251475] RPC: Registered tcp-with-tls transport module.
[    0.251481] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.252332] pci 0000:00:14.0: ROM [mem 0xfc080000-0xfc08ffff pref]: assigned
[    0.252357] pci 0000:00:14.1: ROM [mem 0xfc090000-0xfc09ffff pref]: assigned
[    0.252370] pci 0000:00:14.2: ROM [mem 0xfc0a0000-0xfc0affff pref]: assigned
[    0.252381] pci 0000:00:14.4: ROM [mem 0xfc0b0000-0xfc0bffff pref]: assigned
[    0.252391] pci 0000:00:14.5: ROM [mem 0xfc0c0000-0xfc0cffff pref]: assigned
[    0.252401] pci 0000:00:14.6: ROM [mem 0xfc0d0000-0xfc0dffff pref]: assigned
[    0.252412] pci 0000:00:14.7: ROM [mem 0xfc0e0000-0xfc0effff pref]: assigned
[    0.252421] pci 0000:00:14.3: ROM [mem 0xfc0f0000-0xfc0f0fff pref]: assigned
[    0.252438] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.252448] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[    0.252517] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.252532] pci 0000:00:02.0: CLS mismatch (64 != 512), using 64 bytes
[    0.252678] pci 0000:00:00.0: Adding to iommu group 0
[    0.252755] pci 0000:00:14.0: Adding to iommu group 1
[    0.252780] pci 0000:00:14.1: Adding to iommu group 1
[    0.252804] pci 0000:00:14.2: Adding to iommu group 1
[    0.252829] pci 0000:00:14.3: Adding to iommu group 1
[    0.252834] Trying to unpack rootfs image as initramfs...
[    0.252853] pci 0000:00:14.4: Adding to iommu group 1
[    0.252880] pci 0000:00:14.5: Adding to iommu group 1
[    0.252903] pci 0000:00:14.6: Adding to iommu group 1
[    0.252927] pci 0000:00:14.7: Adding to iommu group 1
[    0.252988] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.253003] AMD-Vi: Extended features (0x840, 0x0): IA
[    0.253014] AMD-Vi: Interrupt remapping enabled
[    0.253176] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.253186] software IO TLB: mapped [mem 0x000000007afe8000-0x000000007efe8000] (64MB)
[    0.253294] LVT offset 0 assigned for vector 0x400
[    0.256407] perf: AMD IBS detected (0x000000ff)
[    0.256462] kvm_amd: TSC scaling supported
[    0.256469] kvm_amd: Nested Virtualization enabled
[    0.256474] kvm_amd: Nested Paging enabled
[    0.256480] kvm_amd: LBR virtualization supported
[    0.279338] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.282917] Initialise system trusted keyrings
[    0.283061] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    0.283458] fuse: init (API version 7.43)
[    0.318768] NET: Registered PF_ALG protocol family
[    0.318799] xor: automatically using best checksumming function   avx       
[    0.318809] Key type asymmetric registered
[    0.318817] Asymmetric key parser 'x509' registered
[    0.318884] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.318896] io scheduler mq-deadline registered
[    0.318904] io scheduler kyber registered
[    0.344456] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.345119] Non-volatile memory driver v1.3
[    0.345143] Linux agpgart interface v0.103
[    0.345477] [drm] amdgpu kernel modesetting enabled.
[    0.346824] brd: module loaded
[    0.349316] loop: module loaded
[    0.349512] aeolia_pcie 0000:00:14.4: apcie_probe()
[    0.349555] aeolia_pcie 0000:00:14.4: apcie glue probe
[    0.349569] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 88811120:42417196:01000200
[    0.349587] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain
[    0.349596] aeolia_pcie 0000:00:14.4: devid = 164
[    0.349604] AMD-Vi: Remapping Selected: a4
[    0.349616] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23) (1024)
[    0.349888] apcie_msi_init((____ptrval____), (____ptrval____), 1, 0x400, (____ptrval____))
[    0.349903] apcie_msi_init((____ptrval____), (____ptrval____), 2, 0x401, (____ptrval____))
[    0.349912] apcie_msi_init((____ptrval____), (____ptrval____), 3, 0x402, (____ptrval____))
[    0.349922] apcie_msi_init((____ptrval____), (____ptrval____), 4, 0x403, (____ptrval____))
[    0.349933] apcie_msi_init((____ptrval____), (____ptrval____), 5, 0x404, (____ptrval____))
[    0.349942] apcie_msi_init((____ptrval____), (____ptrval____), 6, 0x405, (____ptrval____))
[    0.349951] apcie_msi_init((____ptrval____), (____ptrval____), 7, 0x406, (____ptrval____))
[    0.349960] apcie_msi_init((____ptrval____), (____ptrval____), 8, 0x407, (____ptrval____))
[    0.349969] apcie_msi_init((____ptrval____), (____ptrval____), 9, 0x408, (____ptrval____))
[    0.349978] apcie_msi_init((____ptrval____), (____ptrval____), 10, 0x409, (____ptrval____))
[    0.349987] apcie_msi_init((____ptrval____), (____ptrval____), 11, 0x40a, (____ptrval____))
[    0.349996] apcie_msi_init((____ptrval____), (____ptrval____), 12, 0x40b, (____ptrval____))
[    0.350005] apcie_msi_init((____ptrval____), (____ptrval____), 13, 0x40c, (____ptrval____))
[    0.350014] apcie_msi_init((____ptrval____), (____ptrval____), 14, 0x40d, (____ptrval____))
[    0.350023] apcie_msi_init((____ptrval____), (____ptrval____), 15, 0x40e, (____ptrval____))
[    0.350032] apcie_msi_init((____ptrval____), (____ptrval____), 16, 0x40f, (____ptrval____))
[    0.350041] apcie_msi_init((____ptrval____), (____ptrval____), 17, 0x410, (____ptrval____))
[    0.350050] apcie_msi_init((____ptrval____), (____ptrval____), 18, 0x411, (____ptrval____))
[    0.350059] apcie_msi_init((____ptrval____), (____ptrval____), 19, 0x412, (____ptrval____))
[    0.350068] apcie_msi_init((____ptrval____), (____ptrval____), 20, 0x413, (____ptrval____))
[    0.350077] apcie_msi_init((____ptrval____), (____ptrval____), 21, 0x414, (____ptrval____))
[    0.350086] apcie_msi_init((____ptrval____), (____ptrval____), 22, 0x415, (____ptrval____))
[    0.350095] apcie_msi_init((____ptrval____), (____ptrval____), 23, 0x416, (____ptrval____))
[    0.350125] aeolia_pcie 0000:00:14.4: irq_domain_alloc_irqs = 1
[    0.350133] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23
[    0.350141] aeolia_pcie 0000:00:14.4: dev->irq=1
[    0.350167] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 (____ptrval____)
[    0.350180] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3)
[    0.374524] Turn ON BT/WLAN: ret=20, reply 00 00 00 00
[    0.374622] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0
[    0.414536] ret=46, reply 00 00 02 00 00 00 1f 00
[    0.419521] ret=20, reply 00 00 01 02 10 00 00 00
[    0.424513] ret=20, reply 00 00 00 00 00 00 00 00
[    0.424798] sky2: driver version 1.30
[    0.424876] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1
[    0.424937] sky2 0000:00:14.1: apcie_assign_irqs(1) (256)
[    0.424990] apcie_msi_init((____ptrval____), (____ptrval____), 24, 0x100, (____ptrval____))
[    0.425008] sky2 0000:00:14.1: irq_domain_alloc_irqs = 18
[    0.425015] sky2 0000:00:14.1: apcie_assign_irqs returning 1
[    0.425036] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 (____ptrval____)
[    0.425049] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[    0.425341] sky2 0000:00:14.1 eth0: addr <redacted>
[    0.425526] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3) (1792)
[    0.425581] apcie_msi_init((____ptrval____), (____ptrval____), 25, 0x700, (____ptrval____))
[    0.425593] apcie_msi_init((____ptrval____), (____ptrval____), 26, 0x701, (____ptrval____))
[    0.425603] apcie_msi_init((____ptrval____), (____ptrval____), 27, 0x702, (____ptrval____))
[    0.425616] xhci_aeolia 0000:00:14.7: irq_domain_alloc_irqs = 19
[    0.425623] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3
[    0.425631] xhci_aeolia 0000:00:14.7: version 3.0
[    0.425647] xhci_aeolia 0000:00:14.7: Belize SATA PHY init
[    0.452479] Freeing initrd memory: 6896K
[    1.425680] xhci_aeolia 0000:00:14.7: Belize SATA PHY Trace length : 6
[    2.425765] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16f948e071b, max_idle_ns: 440795275880 ns
[    2.425832] clocksource: Switched to clocksource tsc
[    2.425875] xhci_aeolia 0000:00:14.7: AHCI vers 0001.0300, 32 command slots, 3 Gbps, ATA mode
[    2.425891] xhci_aeolia 0000:00:14.7: 1/1 ports implemented (port mask 0x1)
[    2.425901] xhci_aeolia 0000:00:14.7: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    2.426006] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000019) mask=0x2 irq=26 hwirq=0x701 (____ptrval____)
[    2.426023] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 1, addr fee00000 data: 0x00000019 (25)
[    2.426481] scsi host0: ahci
[    2.426572] ata1: SATA max UDMA/133 abar m2097152@0xdc200000 port 0xdc200100 irq 26 lpm-pol 0
[    2.426588] xhci_aeolia_probe_one 0, controller is 90cf
[    2.426631] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.426647] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1
[    2.426750] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x0000080000010010
[    2.426769] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 (____ptrval____)
[    2.426781] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24)
[    2.426807] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000
[    2.426896] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.426907] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2
[    2.426918] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed
[    2.427006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    2.427017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.427026] usb usb1: Product: xHCI Host Controller
[    2.427033] usb usb1: Manufacturer: Linux 6.15.5-gentoo xhci-hcd
[    2.427040] usb usb1: SerialNumber: 0000:00:14.7
[    2.427263] hub 1-0:1.0: USB hub found
[    2.427287] hub 1-0:1.0: 2 ports detected
[    2.427436] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.427496] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    2.427507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.427516] usb usb2: Product: xHCI Host Controller
[    2.427523] usb usb2: Manufacturer: Linux 6.15.5-gentoo xhci-hcd
[    2.427529] usb usb2: SerialNumber: 0000:00:14.7
[    2.427688] hub 2-0:1.0: USB hub found
[    2.427711] hub 2-0:1.0: 2 ports detected
[    2.428362] xhci_aeolia_probe_one 2, controller is 90cf
[    2.428385] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.428395] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3
[    2.428481] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x0000080000010010
[    2.428500] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 (____ptrval____)
[    2.428512] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26)
[    2.428538] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000
[    2.428550] debugfs: Directory '0000:00:14.7' with parent 'xhci' already present!
[    2.428578] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.428587] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4
[    2.428598] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed
[    2.428669] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    2.428680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.428689] usb usb3: Product: xHCI Host Controller
[    2.428695] usb usb3: Manufacturer: Linux 6.15.5-gentoo xhci-hcd
[    2.428702] usb usb3: SerialNumber: 0000:00:14.7
[    2.428856] hub 3-0:1.0: USB hub found
[    2.428878] hub 3-0:1.0: 1 port detected
[    2.428996] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.429053] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    2.429064] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.429072] usb usb4: Product: xHCI Host Controller
[    2.429078] usb usb4: Manufacturer: Linux 6.15.5-gentoo xhci-hcd
[    2.429085] usb usb4: SerialNumber: 0000:00:14.7
[    2.429253] hub 4-0:1.0: USB hub found
[    2.429274] hub 4-0:1.0: 1 port detected
[    2.429522] usbcore: registered new interface driver uas
[    2.429567] usbcore: registered new interface driver usb-storage
[    2.429604] i8042: PNP: No PS/2 controller found.
[    2.429746] mousedev: PS/2 mouse device common for all mice
[    2.429877] usbcore: registered new interface driver xpad
[    2.429941] i2c_dev: i2c /dev entries driver
[    2.430265] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    2.430307] sdhci: Secure Digital Host Controller Interface driver
[    2.430314] sdhci: Copyright(c) Pierre Ossman
[    2.430390] hid: raw HID events driver (C) Jiri Kosina
[    2.430387] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0)
[    2.430451] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1) (768)
[    2.430514] apcie_msi_init((____ptrval____), (____ptrval____), 28, 0x300, (____ptrval____))
[    2.430532] sdhci-pci 0000:00:14.3: irq_domain_alloc_irqs = 1c
[    2.430540] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1
[    2.430644] usbcore: registered new interface driver usbhid
[    2.430657] usbhid: USB HID core driver
[    2.430815] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 (____ptrval____)
[    2.430834] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27)
[    2.431031] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq
[    2.431217] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA
[    2.431327] NET: Registered PF_INET6 protocol family
[    2.431853] Segment Routing with IPv6
[    2.431885] In-situ OAM (IOAM) with IPv6
[    2.431929] NET: Registered PF_PACKET protocol family
[    2.431994] Bluetooth: RFCOMM TTY layer initialized
[    2.432007] Bluetooth: RFCOMM socket layer initialized
[    2.432019] Bluetooth: RFCOMM ver 1.11
[    2.432029] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.432036] Bluetooth: BNEP filters: protocol multicast
[    2.432044] Bluetooth: BNEP socket layer initialized
[    2.432051] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.432059] Bluetooth: HIDP socket layer initialized
[    2.432701] microcode: Current revision: 0x07013005
[    2.432978] IPI shorthand broadcast: enabled
[    2.439942] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[    2.440123] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[    2.445369] sched_clock: Marking stable (2296006319, 149107335)->(2455009551, -9895897)
[    2.445643] registered taskstats version 1
[    2.445654] Loading compiled-in X.509 certificates
[    2.448755] Btrfs loaded, zoned=no, fsverity=no
[    2.449204] amdgpu 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    2.449224] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9922 0x1002:0x9922 0x00).
[    2.449260] [drm] register mmio base: 0xE4800000
[    2.449267] [drm] register mmio size: 262144
[    2.449408] amdgpu 0000:00:01.0: amdgpu: detected ip block number 0 <cik_common>
[    2.449420] amdgpu 0000:00:01.0: amdgpu: detected ip block number 1 <gmc_v7_0>
[    2.449429] amdgpu 0000:00:01.0: amdgpu: detected ip block number 2 <cik_ih>
[    2.449436] amdgpu 0000:00:01.0: amdgpu: detected ip block number 3 <dce_v8_0>
[    2.449445] amdgpu 0000:00:01.0: amdgpu: detected ip block number 4 <gfx_v7_0>
[    2.449453] amdgpu 0000:00:01.0: amdgpu: detected ip block number 5 <cik_sdma>
[    2.449486] ACPI Error: AE_BAD_PARAMETER, Thread 2161755968 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20240827/utmutex-252)
[    2.449503] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20240827/utmutex-289)
[    2.485381] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR
[    2.485393] amdgpu: ATOM BIOS: 113-Starsha-005
[    2.485421] Loading firmware: amdgpu/liverpool_sdma.bin
[    2.485489] Loading firmware: amdgpu/liverpool_sdma1.bin
[    2.485524] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    2.485825] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.485841] amdgpu 0000:00:01.0: amdgpu: VRAM: 2048M 0x0000000F00000000 - 0x0000000F7FFFFFFF (2048M used)
[    2.485853] amdgpu 0000:00:01.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    2.485869] [drm] Detected VRAM RAM=2048M, BAR=2048M
[    2.485875] [drm] RAM width 64bits UNKNOWN
[    2.486032] [drm] amdgpu: 2048M of VRAM memory ready
[    2.486041] [drm] amdgpu: 2923M of GTT memory ready.
[    2.486078] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.486093] amdgpu 0000:00:01.0: amdgpu: Done gart
[    2.486127] amdgpu 0000:00:01.0: amdgpu: Done init
[    2.486161] [drm] PCIE GART of 512M enabled (table at 0x0000000F00100000).
[    2.486948] [drm] AMDGPU Display Connectors
[    2.486965] [drm] Connector 0:
[    2.486970] [drm]   HDMI-A-1
[    2.486975] [drm]   HPD1
[    2.486980] [drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[    2.486989] [drm]   Encoders:
[    2.486994] [drm]     DFP1: INTERNAL_UNIPHY
[    2.487418] Loading firmware: amdgpu/liverpool_pfp.bin
[    2.487499] Loading firmware: amdgpu/liverpool_me.bin
[    2.487540] Loading firmware: amdgpu/liverpool_ce.bin
[    2.487575] Loading firmware: amdgpu/liverpool_mec.bin
[    2.487614] Loading firmware: amdgpu/liverpool_mec2.bin
[    2.487653] Loading firmware: amdgpu/liverpool_rlc.bin
[    2.492846] amdgpu 0000:00:01.0: amdgpu: SE 2, SH per SE 1, CU per SH 9, active_cu_number 18
[    2.492969] amdgpu 0000:00:01.0: amdgpu: Runtime PM not available
[    2.493388] [drm] Initialized amdgpu 3.63.0 for 0000:00:01.0 on minor 0
[    2.514529] amdgpu: ps4_bridge_get_modes
[    2.544483] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery tried 5 times
[    2.544502] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery failed
[    2.573977] mmc0: Tuning failed, falling back to fixed sampling clock
[    2.574040] mmc0: error -84 whilst initialising SDIO card
[    2.577271] usb usb3-port1: over-current condition
[    2.697263] mmc0: Tuning failed, falling back to fixed sampling clock
[    2.697318] mmc0: error -84 whilst initialising SDIO card
[    2.740200] usb usb4-port1: over-current condition
[    2.822730] Console: switching to colour frame buffer device 240x67
[    2.831745] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device
[    2.832010] ahci 0000:00:14.2: version 3.0
[    2.832079] ahci 0000:00:14.2: apcie_assign_irqs(1) (512)
[    2.832165] apcie_msi_init((____ptrval____), (____ptrval____), 31, 0x200, (____ptrval____))
[    2.832207] ahci 0000:00:14.2: irq_domain_alloc_irqs = 1f
[    2.832232] ahci 0000:00:14.2: apcie_assign_irqs returning 1
[    2.832277] ahci 0000:00:14.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, unknown mode
[    2.832313] ahci 0000:00:14.2: 1/1 ports implemented (port mask 0x1)
[    2.832341] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    2.832426] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001c) mask=0x1 irq=31 hwirq=0x200 (____ptrval____)
[    2.832471] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001c (28)
[    2.833299] scsi host1: ahci
[    2.833405] ata2: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31 lpm-pol 0
[    2.833589] printk: legacy console [netcon0] enabled
[    2.833625] netconsole: network logging started
[    2.833769] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.834840] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.835519] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    2.835581] ALSA device list:
[    2.835600]   #0: HD-Audio Generic at 0xe4840000 irq 29
[    2.835710] Loading firmware: regulatory.db
[    2.835761] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.835801] cfg80211: failed to load regulatory.db
[    2.837590] mmc0: Tuning failed, falling back to fixed sampling clock
[    2.837659] mmc0: error -5 whilst initialising SDIO card
[    2.844476] amdgpu: ps4_bridge_get_modes
[    2.884167] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.887537] ata1.00: ATA-8: HGST HTS545050A7E680, GR2OA3E0, max UDMA/133
[    2.890907] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    2.894134] ata1.00: configured for UDMA/133
[    2.895878] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 A3E0 PQ: 0 ANSI: 5
[    2.898011] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    2.898069] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    2.900853] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.902406] sd 0:0:0:0: [sda] Write Protect is off
[    2.903711] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.903809] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.905489] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    3.025005] mmc0: Tuning failed, falling back to fixed sampling clock
[    3.028249] mmc0: error -84 whilst initialising SDIO card
[    3.292241] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.295523] ata2.00: ATAPI: SONY    PS-SYSTEM   408R, 3100, max UDMA/66
[    3.299329] ata2.00: configured for UDMA/66
[    3.306068] scsi 1:0:0:0: CD-ROM            SONY     PS-SYSTEM   408R 3100 PQ: 0 ANSI: 5
[    3.324584] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[    3.325962] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.340581] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.340760] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.195874]  sda: sda1 sda3 sda5 sda7 sda9 sda10 sda11 sda12 sda13 sda17 sda19 sda25 sda27 sda29 sda31
[    4.199790] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.201787] Freeing unused kernel image (initmem) memory: 908K
[    4.203741] Write protecting the kernel read-only data: 24576k
[    4.206727] Freeing unused kernel image (text/rodata gap) memory: 1796K
[    4.208612] Freeing unused kernel image (rodata/data gap) memory: 244K
[    4.210095] rodata_test: all tests were successful
[    4.211772] Run /init as init process
[    4.213623]   with arguments:
[    4.213629]     /init
[    4.213632]     n
[    4.213634]   with environment:
[    4.213636]     HOME=/
[    4.213639]     TERM=linux
[   15.950563] random: crng init done

crashniels

Random-Kafk Really strange. I have a 116A (Aeolia) which works fine and a 7016B (Belize B0) which also works fine.

Random-Kafk

crashniels Strange indeed. Do you reckon you can you find the CIS Vendor ID and Device ID fields of your SDIO card to determine what wireless chip is actually used?
It might be possible using the mmc command from mmc-utils, or from entries in /sys or /dev (you'd have to look online how, I'm not sure myself).
I don't know if the "card"'s IDs are printed in dmesg. lshw, etc. might be useful to find the card id. The SDHCI host's IDs are typically printed in dmesg
[ 2.430387] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0)

From kernel printks I added, my card has the id [02df:912c], like I mentioned above.
That's a Marvell card with an unknown device id. But based on further reading I did, I think it could just be the device id of the F0 (function 0, somewhat like the bootloader component) of the sdio card.

After F0 is loaded, that itself helps load, I assume
F1: the WLAN function [02df:912d]; and then
F2: the BT function [02df:912e]; which have their entries in the sdio_ids header in the linux kernel.

Random-Kafk

So I was able to find a fix for the SDIO issue.

After much testing using kernel printks in the MMC stack, and trying out various workarounds and quirks to get the SDHCI tuned and SDIO card initialized properly, I came across this commit in the Linux Kernel source, with the workaround for presetting a base frequency for Marvell 8887 chips.

https://github.com/torvalds/linux/commit/8ccd66f258cd79420102f3735b3bc8d974a22088
https://patchwork.kernel.org/project/linux-mmc/patch/1523343632-9518-3-git-send-email-harish_kandiga@mentor.com/
This is because "Marvell does not recommend to use SDIO at the speed of higher than 150MHz."

This is for cards that use SDR104 (Single Data Rate 104), with a max transfer speed of 104 MB/s at a clock frequency of 208 MHz.

The SD Host Controller on the CUH-1215/1216 models support up to SDR104 as well, but I always found it odd that the max host frequency was 200,000,000 Hz, instead of the 208,000,000 Hz that should be possible with the SDR104 mode.

https://github.com/feeRnt/ps4-linux-12xx/blob/702dd3c6fc52a68c4ff5d80594b0d5629a8e80c0/drivers/mmc/host/sdhci.c#L3537C2-L3539C9
[ 2.639704] sdhci: MMC_TIMING_UHS_SDR104 in sdhci_execute_tuning, breaking.

https://github.com/feeRnt/ps4-linux-12xx/blob/702dd3c6fc52a68c4ff5d80594b0d5629a8e80c0/drivers/mmc/host/sdhci.c#L5260
[ 2.521319] sdhci: Set new host->max_clk to 200000000 in sdhci_setup_host.

I wasn't sure if the 150 MHz should only be for Marvell chips that use SDR104, or only the 8887 Chip.
It is noteworthy that the 1215-1216 models also use a Marvell SDHCI adpater as well, along with the Marvell card.

https://fccid.io/AK8CUH120Z1/Test-Setup-Photos/Test-setup-photos-Revised-2643835.pdf , page 6
C - SDIO Adapter - SK-1520 - SK012C082 - MARVELL -

But following my hunch was indeed the right approach. I tried this patch for my SDIO card on the PS4, the Marvell 8897 card:
https://github.com/feeRnt/ps4-linux-12xx/commit/acbf45e7021e96e699fb1fffb94f4b00ee6ed54a#diff-dde1252a28ea0ce2c05fbb55081c0abf61de1f3c99f74ddf6bdedf938451fd35R150

--- b/drivers/mmc/core/quirks.h
+++ a/drivers/mmc/core/quirks.h

+       //on multi function cards, the base, non wifi, non BT, function, is called F0
+       //Since 8897 traditionally doesn't have any need for any quirk handling, the SDIO_IDs
+       //file doesn't include the F0 ID. which is the 0x912c. (I assume).
+       SDIO_FIXUP(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8897_F0,
+                  add_limit_rate_quirk, 150000000),

where I needed to put the SDIO_DEVICE_ID_MARVELL_8897_F0 in the IDs file, based on my debugging of the actual card that is used on my PS4:

--- a/include/linux/mmc/sdio_ids.h
+++ b/include/linux/mmc/sdio_ids.h
@@ -88,6 +88,7 @@
 #define SDIO_DEVICE_ID_MARVELL_8797_F0         0x9128
 #define SDIO_DEVICE_ID_MARVELL_8797_WLAN       0x9129
 #define SDIO_DEVICE_ID_MARVELL_8797_BT         0x912a
+#define SDIO_DEVICE_ID_MARVELL_8897_F0         0x912c //8897_F0_PS4_1216
 #define SDIO_DEVICE_ID_MARVELL_8897_WLAN       0x912d
 #define SDIO_DEVICE_ID_MARVELL_8897_BT         0x912e
 #define SDIO_DEVICE_ID_MARVELL_8887_F0         0x9134

with these two patches, I booted Linux on my 1216, and I had working wifi.
Right now the version of the kernel I have is meddled with many pr_debug calls, which makes it extremely slow to startup because of the console message spam.

I am going to do a rebase of my source to clean up all the necessary patches, and release a pre-compiled 5.15 kernel for testing.
I'll paste a working dmesg with that clean version.

After that, I'll try testing the patches on crashniels' 6.15 kernel, and start a pull request to merge the fixes (which hopefully should work).

🚀

Random-Kafk

Random-Kafk So I got a little sick after this, but here are the latest, clean releases. It turned out I still needed some of the previous patches that don't fix the problem on their own, along with the newest two patches I mentioned.

--- a/drivers/mmc/core/sdio_ops.c
+++ b/drivers/mmc/core/sdio_ops.c
@@ -80,7 +80,11 @@ static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
        cmd.arg |= in;
        cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
 
-       err = mmc_wait_for_cmd(host, &cmd, 0);
+       /* err = mmc_wait_for_cmd(host, &cmd, 0);
+        * https://fa.linux.kernel.narkive.com/t6hn0noQ/patch-mmc-sdio-retry-cmd52-53-when-error-happens
+        * Use 3 retries instead of 0 retries:
+        */
+       err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
        if (err)
                return err;

a patch to have more retries in an MMC CMD52 or CMD53..
And then

--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -368,6 +368,12 @@ static const struct sdhci_pci_fixes sdhci_aeolia = {
        .probe_slot     = aeolia_probe_slot,
        .remove_slot    = aeolia_remove_slot,
        .enable_dma     = aeolia_enable_dma,
+       .quirks         = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL |
+                         SDHCI_QUIRK_DELAY_AFTER_POWER |
+                         SDHCI_QUIRK_SINGLE_POWER_WRITE,
+       .quirks2        = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+                         SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN,
+                         SDHCI_QUIRK2_TUNING_WORK_AROUND,
 };

some special SDHCI (host) quirks that I had hand picked after observing and trying to get at the code.
Now some of these might be redundant, but I didn't feel like testing that right now.

The additional retries and the extra quirks should be fine to have as is right here. But at least it works !
This truly is a complicated mess 😅

Random-Kafk

Here is the repo:
https://github.com/feeRnt/ps4-linux-12xx/

And, kernel version 5.15.15 (based on codedwrench's source) with working WiFi+BT and blackscreen fix (BELIZE ONLY):
https://github.com/feeRnt/ps4-linux-12xx/releases/tag/v5.15.15__2.9.0-testing

Kernel version 6.15.4 (based on crashniels' source) with working WiFi+BT and blackscreen fix (AEOLIA+BELIZE):
https://github.com/feeRnt/ps4-linux-12xx/releases/tag/v6.15.4__wifi_blkscrn

Feel free to test and share the results.

Random-Kafk

Random-Kafk dmesg with 6.15 kernel:

[    0.000000] ps4: x86_ps4_early_setup: PS4 early setup
[    0.000000] Linux version 6.15.4 (root@355c6ba104b3) (gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #2 SMP PREEMPT_DYNAMIC Fri Jul 25 06:20:55 UTC 2025
[    0.000000] Command line: initcall_blacklist=sony,hid_sony log_buf_len=100M panic=0 clocksource=tsc net.ifnames=0 console=tty0,tty1,tty2 drm.debug=0 iommu=pt vfio_iommu_type1.allow_unsafe_interrupts=1 consoleblank=0 video=HDMI-A-1:1920x1080
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000180000000-0x000000027effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.1 present.
[    0.000000] DMI:  , BIOS unde Wed 09/01/2021  5:2
[    0.000000] DMI: Memory slots populated: 1/1
[    0.000000] ps4: EMC timer started in 28257 TSC ticks
[    0.000000] ps4: Calibrated TSC frequency: 1593787744 kHz
[    0.000000] tsc: Detected 1593.788 MHz processor
[    0.001319] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001325] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001342] last_pfn = 0x27f000 max_arch_pfn = 0x400000000
[    0.001351] MTRR map: 6 entries (3 fixed + 3 variable; max 20), built from 9 variable MTRRs
[    0.001356] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001776] e820: update [mem 0x80000000-0x17fffffff] usable ==> reserved
[    0.001790] last_pfn = 0x80000 max_arch_pfn = 0x400000000
[    0.010509] Using GB pages for direct mapping
[    0.238152] printk: log buffer data + meta data: 134217728 + 469762048 = 603979776 bytes
[    0.238160] printk: early log buf free: 62904(95%)
[    0.238162] RAMDISK: [mem 0x3e000000-0x3e6bbfff]
[    0.238182] ACPI: Early table checksum verification disabled
[    0.238191] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE   )
[    0.238201] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE    ORBIS    20121218 INTL 20110211)
[    0.238212] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE    ORBIS    20130205 INTL 20110211)
[    0.238224] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE    ORBIS    20121002 INTL 20110211)
[    0.238232] ACPI: FACS 0x00000000000E012C 000040
[    0.238237] ACPI: FACS 0x00000000000E012C 000040
[    0.238243] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE    ORBIS    20120725 INTL 20110211)
[    0.238250] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE    ORBIS    20120725 INTL 20110211)
[    0.238257] ACPI: SSDT 0x00000000000E0730 001944 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.238264] ACPI: IVRS 0x00000000000E2074 000054 (v01 F0F    PS4KEXEC 20161225 KEXC 20161225)
[    0.238270] ACPI: Reserving FACP table memory at [mem 0xe016c-0xe025f]
[    0.238274] ACPI: Reserving DSDT table memory at [mem 0xe0430-0xe05bb]
[    0.238276] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b]
[    0.238278] ACPI: Reserving FACS table memory at [mem 0xe012c-0xe016b]
[    0.238280] ACPI: Reserving APIC table memory at [mem 0xe0298-0xe0303]
[    0.238282] ACPI: Reserving MCFG table memory at [mem 0xe0304-0xe033f]
[    0.238284] ACPI: Reserving SSDT table memory at [mem 0xe0730-0xe2073]
[    0.238286] ACPI: Reserving IVRS table memory at [mem 0xe2074-0xe20c7]
[    0.238371] No NUMA configuration found
[    0.238373] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
[    0.238382] NODE_DATA(0) allocated [mem 0x25affa800-0x25affdfff]
[    0.238434] Zone ranges:
[    0.238435]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.238439]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.238443]   Normal   [mem 0x0000000100000000-0x000000027effffff]
[    0.238446] Movable zone start for each node
[    0.238448] Early memory node ranges
[    0.238448]   node   0: [mem 0x0000000000001000-0x0000000000007fff]
[    0.238451]   node   0: [mem 0x0000000000080000-0x0000000000099fff]
[    0.238454]   node   0: [mem 0x0000000000100000-0x00000000003fffff]
[    0.238456]   node   0: [mem 0x0000000000480000-0x000000000067ffff]
[    0.238458]   node   0: [mem 0x0000000000700000-0x000000007efe7fff]
[    0.238461]   node   0: [mem 0x000000007f000000-0x000000007fffffff]
[    0.238463]   node   0: [mem 0x0000000180000000-0x000000027effffff]
[    0.238467] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
[    0.238475] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.238483] On node 0, zone DMA: 120 pages in unavailable ranges
[    0.238502] On node 0, zone DMA: 102 pages in unavailable ranges
[    0.238518] On node 0, zone DMA: 128 pages in unavailable ranges
[    0.238560] On node 0, zone DMA: 128 pages in unavailable ranges
[    0.246265] On node 0, zone DMA32: 24 pages in unavailable ranges
[    0.261973] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.262669] ACPI: No IOAPIC entries present
[    0.262671] ACPI: Using ACPI for processor (LAPIC) configuration information
[    0.262687] CPU topo: Max. logical packages:   1
[    0.262689] CPU topo: Max. logical dies:       1
[    0.262690] CPU topo: Max. dies per package:   1
[    0.262704] CPU topo: Max. threads per core:   1
[    0.262706] CPU topo: Num. cores per package:     8
[    0.262707] CPU topo: Num. threads per package:   8
[    0.262708] CPU topo: Allowing 8 present CPUs plus 0 hotplug CPUs
[    0.262739] [mem 0xfc000000-0xffffffff] available for PCI devices
[    0.262746] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.262760] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.263459] percpu: Embedded 42 pages/cpu s131544 r8192 d32296 u262144
[    0.263480] pcpu-alloc: s131544 r8192 d32296 u262144 alloc=1*2097152
[    0.263488] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.263525] Kernel command line: initcall_blacklist=sony,hid_sony log_buf_len=100M panic=0 clocksource=tsc net.ifnames=0 console=tty0,tty1,tty2 drm.debug=0 iommu=pt vfio_iommu_type1.allow_unsafe_interrupts=1 consoleblank=0 video=HDMI-A-1:1920x1080
[    0.263554] blacklisting initcall sony
[    0.263561] blacklisting initcall hid_sony
[    0.265510] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.266417] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.266513] software IO TLB: area num 8.
[    0.295195] Fallback order for Node 0: 0 
[    0.295211] Built 1 zonelists, mobility grouping on.  Total pages: 1568265
[    0.295216] Policy zone: Normal
[    0.295220] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.328924] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.330038] Dynamic Preempt: voluntary
[    0.330135] rcu: Preemptible hierarchical RCU implementation.
[    0.330138] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.330167] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0
[    0.330232] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.330292] call_irq_handler: 0.49 No irq handler for vector
[    0.330327] Console: colour dummy device 80x25
[    0.330334] printk: legacy console [tty0] enabled
[    0.330886] ACPI: Core revision 20240827
[    0.330968] ACPI: setting ELCR to 0200 (from ffff)
[    0.330990] Failed to register legacy timer interrupt
[    0.330998] APIC: Switch to symmetric I/O mode setup
[    0.331037] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    0.331165] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x16f938a41c6, max_idle_ns: 440795227558 ns
[    0.331191] Calibrating delay loop (skipped), value calculated using timer frequency.. 3187.57 BogoMIPS (lpj=1593788)
[    0.331248] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[    0.331257] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
[    0.331272] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.331285] Spectre V2 : Mitigation: Retpolines
[    0.331292] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.331302] RETBleed: Mitigation: untrained return thunk
[    0.331312] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.331329] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.331339] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.331347] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.331355] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.331364] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.332182] Freeing SMP alternatives memory: 52K
[    0.332182] pid_max: default: 32768 minimum: 301
[    0.332182] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.332182] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.332182] smpboot: CPU0: AMD DG1101SKF84HV (family: 0x16, model: 0x13, stepping: 0x1)
[    0.332182] Performance Events: AMD PMU driver.
[    0.332182] ... version:                0
[    0.332182] ... bit width:              48
[    0.332182] ... generic registers:      4
[    0.332182] ... value mask:             0000ffffffffffff
[    0.332182] ... max period:             00007fffffffffff
[    0.332182] ... fixed-purpose events:   0
[    0.332182] ... event mask:             000000000000000f
[    0.332182] signal: max sigframe size: 1776
[    0.332182] rcu: Hierarchical SRCU implementation.
[    0.332191] rcu: 	Max phase no-delay instances is 400.
[    0.332353] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.335186] smp: Bringing up secondary CPUs ...
[    0.335481] smpboot: x86: Booting SMP configuration:
[    0.335490] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.345293] smp: Brought up 1 node, 8 CPUs
[    0.345316] smpboot: Total of 8 processors activated (25500.60 BogoMIPS)
[    0.346404] Memory: 5458604K/6273060K available (21322K kernel code, 1047K rwdata, 6668K rodata, 1648K init, 1200K bss, 809960K reserved, 0K cma-reserved)
[    0.346858] devtmpfs: initialized
[    0.347895] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.347895] posixtimers hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.347895] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.348249] prandom: seed boundary self test passed
[    0.348991] prandom: 100 self tests passed
[    0.349250] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.349361] audit: initializing netlink subsys (disabled)
[    0.349432] audit: type=2000 audit(0.018:1): state=initialized audit_enabled=0 res=1
[    0.349432] i2c-core: driver [dummy] registered
[    0.349432] thermal_sys: Registered thermal governor 'step_wise'
[    0.349432] cpuidle: using governor ladder
[    0.349440] cpuidle: using governor menu
[    0.350360] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.350396] PCI: Using configuration type 1 for base access
[    0.350757] HugeTLB: allocation took 0ms with hugepage_allocation_threads=2
[    0.350757] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.350757] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.351571] cryptd: max_cpu_qlen set to 1000
[    0.368188] raid6: sse2x4   gen()  4072 MB/s
[    0.385186] raid6: sse2x2   gen()  3988 MB/s
[    0.402190] raid6: sse2x1   gen()  2980 MB/s
[    0.402199] raid6: using algorithm sse2x4 gen() 4072 MB/s
[    0.419189] raid6: .... xor() 2009 MB/s, rmw enabled
[    0.419199] raid6: using ssse3x2 recovery algorithm
[    0.419326] ACPI: Added _OSI(Module Device)
[    0.419336] ACPI: Added _OSI(Processor Device)
[    0.419344] ACPI: Added _OSI(Processor Aggregator Device)
[    0.421142] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.421543] ACPI: OSL: SCI (IRQ9) allocation failed
[    0.421554] ACPI Error: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20240827/evevent-96)
[    0.421572] ACPI: Unable to start the ACPI Interpreter
[    0.421580] ACPI Error: Could not remove SCI handler (20240827/evmisc-251)
[    0.421958] iommu: Default domain type: Passthrough (set via kernel command line)
[    0.422156] SCSI subsystem initialized
[    0.422204] libata version 3.00 loaded.
[    0.422309] usbcore: registered new interface driver usbfs
[    0.422340] usbcore: registered new interface driver hub
[    0.422370] usbcore: registered new device driver usb
[    0.422412] cec: Failed to create debugfs cec dir
[    0.422554] Advanced Linux Sound Architecture Driver Initialized.
[    0.422924] Bluetooth: Core ver 2.22
[    0.422943] NET: Registered PF_BLUETOOTH protocol family
[    0.422952] Bluetooth: HCI device and connection manager initialized
[    0.422964] Bluetooth: HCI socket layer initialized
[    0.422974] Bluetooth: L2CAP socket layer initialized
[    0.422984] Bluetooth: SCO socket layer initialized
[    0.423208] PCI: Probing PCI hardware
[    0.423219] PCI: root bus 00: using default resources
[    0.423223] PCI: Probing PCI hardware (bus 00)
[    0.423262] PCI host bridge to bus 0000:00
[    0.423272] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.423284] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
[    0.423295] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[    0.423323] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000 conventional PCI endpoint
[    0.423460] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600 conventional PCI endpoint
[    0.423598] pci 0000:00:01.0: [1002:9922] type 00 class 0x030000 PCIe Root Complex Integrated Endpoint
[    0.423635] pci 0000:00:01.0: BAR 0 [mem 0xe0000000-0xe3ffffff 64bit pref]
[    0.423648] pci 0000:00:01.0: BAR 2 [mem 0xe4000000-0xe47fffff 64bit pref]
[    0.423660] pci 0000:00:01.0: BAR 4 [io  0x6000-0x60ff]
[    0.423670] pci 0000:00:01.0: BAR 5 [mem 0xe4800000-0xe483ffff]
[    0.423681] pci 0000:00:01.0: ROM [mem 0x00000000-0x0001ffff pref]
[    0.423695] pci 0000:00:01.0: enabling Extended Tags
[    0.423715] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.423747] pci 0000:00:01.0: supports D1 D2
[    0.423755] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.423859] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300 PCIe Root Complex Integrated Endpoint
[    0.423894] pci 0000:00:01.1: BAR 0 [mem 0xe4840000-0xe4843fff 64bit]
[    0.423912] pci 0000:00:01.1: enabling Extended Tags
[    0.423944] pci 0000:00:01.1: supports D1 D2
[    0.424051] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000 conventional PCI endpoint
[    0.424202] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000 PCIe Endpoint
[    0.424247] pci 0000:00:14.0: BAR 0 [mem 0xfdf8000000-0xfdf9ffffff 64bit]
[    0.424259] pci 0000:00:14.0: BAR 2 [io  0x1000-0x10ff]
[    0.424272] pci 0000:00:14.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.424329] pci 0000:00:14.0: supports D1
[    0.424338] pci 0000:00:14.0: PME# supported from D0 D1 D3hot
[    0.424468] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001 PCIe Endpoint
[    0.424513] pci 0000:00:14.1: BAR 0 [mem 0xc4000000-0xc4003fff 64bit]
[    0.424528] pci 0000:00:14.1: ROM [mem 0x00000000-0x0000ffff pref]
[    0.424579] pci 0000:00:14.1: supports D1
[    0.424587] pci 0000:00:14.1: PME# supported from D0 D1 D3hot
[    0.424711] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002 PCIe Endpoint
[    0.424756] pci 0000:00:14.2: BAR 0 [mem 0xc8000000-0xc8000fff 64bit]
[    0.424770] pci 0000:00:14.2: BAR 5 [mem 0xc8001000-0xc8001fff]
[    0.424780] pci 0000:00:14.2: ROM [mem 0x00000000-0x0000ffff pref]
[    0.424831] pci 0000:00:14.2: supports D1
[    0.424839] pci 0000:00:14.2: PME# supported from D0 D1 D3hot
[    0.424961] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003 PCIe Endpoint
[    0.425006] pci 0000:00:14.3: BAR 0 [mem 0xcc000000-0xcc000fff 64bit]
[    0.425020] pci 0000:00:14.3: ROM [mem 0x00000000-0x00000fff pref]
[    0.425071] pci 0000:00:14.3: supports D1
[    0.425079] pci 0000:00:14.3: PME# supported from D0 D1 D3hot
[    0.425210] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004 PCIe Endpoint
[    0.425255] pci 0000:00:14.4: BAR 0 [mem 0xd0000000-0xd00fffff 64bit]
[    0.425267] pci 0000:00:14.4: BAR 2 [mem 0xd0100000-0xd0107fff 64bit]
[    0.425278] pci 0000:00:14.4: BAR 4 [mem 0xd0200000-0xd03fffff 64bit]
[    0.425289] pci 0000:00:14.4: ROM [mem 0x00000000-0x0000ffff pref]
[    0.425340] pci 0000:00:14.4: supports D1
[    0.425348] pci 0000:00:14.4: PME# supported from D0 D1 D3hot
[    0.425469] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005 PCIe Endpoint
[    0.425514] pci 0000:00:14.5: BAR 0 [mem 0xd4000000-0xd4000fff 64bit]
[    0.425526] pci 0000:00:14.5: BAR 2 [mem 0xd4001000-0xd4001fff 64bit]
[    0.425539] pci 0000:00:14.5: ROM [mem 0x00000000-0x0000ffff pref]
[    0.425590] pci 0000:00:14.5: supports D1
[    0.425598] pci 0000:00:14.5: PME# supported from D0 D1 D3hot
[    0.425720] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006 PCIe Endpoint
[    0.425765] pci 0000:00:14.6: BAR 0 [mem 0xd8000000-0xd8000fff 64bit]
[    0.425777] pci 0000:00:14.6: BAR 2 [mem 0x80000000-0xbfffffff 64bit]
[    0.425788] pci 0000:00:14.6: BAR 4 [mem 0xd9100000-0xd91fffff]
[    0.425798] pci 0000:00:14.6: BAR 5 [mem 0xd9000000-0xd903ffff]
[    0.425809] pci 0000:00:14.6: ROM [mem 0x00000000-0x0000ffff pref]
[    0.425859] pci 0000:00:14.6: supports D1
[    0.425867] pci 0000:00:14.6: PME# supported from D0 D1 D3hot
[    0.425988] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007 PCIe Endpoint
[    0.426032] pci 0000:00:14.7: BAR 0 [mem 0xdc000000-0xdc1fffff 64bit]
[    0.426044] pci 0000:00:14.7: BAR 2 [mem 0xdc200000-0xdc3fffff 64bit]
[    0.426056] pci 0000:00:14.7: BAR 4 [mem 0xdc400000-0xdc5fffff 64bit]
[    0.426066] pci 0000:00:14.7: ROM [mem 0x00000000-0x0000ffff pref]
[    0.426117] pci 0000:00:14.7: supports D1
[    0.426125] pci 0000:00:14.7: PME# supported from D0 D1 D3hot
[    0.426259] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000 conventional PCI endpoint
[    0.426371] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000 conventional PCI endpoint
[    0.426479] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000 conventional PCI endpoint
[    0.426586] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000 conventional PCI endpoint
[    0.426699] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000 conventional PCI endpoint
[    0.426812] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000 conventional PCI endpoint
[    0.426922] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[    0.428794] PCI: pci_cache_line_size set to 64 bytes
[    0.428838] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff]
[    0.428844] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
[    0.428849] e820: reserve RAM buffer [mem 0x00680000-0x006fffff]
[    0.428853] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff]
[    0.428857] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
[    0.428897] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.428897] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.428897] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.428897] vgaarb: loaded
[    0.429195] clocksource: Switched to clocksource tsc-early
[    0.429496] pnp: PnP ACPI: disabled
[    0.434436] NET: Registered PF_INET protocol family
[    0.434757] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.438832] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[    0.438868] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.438889] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.439110] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.439741] TCP: Hash tables configured (established 65536 bind 65536)
[    0.439907] UDP hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.440037] UDP-Lite hash table entries: 4096 (order: 6, 262144 bytes, linear)
[    0.440232] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.440550] RPC: Registered named UNIX socket transport module.
[    0.440561] RPC: Registered udp transport module.
[    0.440568] RPC: Registered tcp transport module.
[    0.440574] RPC: Registered tcp-with-tls transport module.
[    0.440581] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.441332] pci 0000:00:14.0: ROM [mem 0xfc080000-0xfc08ffff pref]: assigned
[    0.441351] pci 0000:00:14.1: ROM [mem 0xfc090000-0xfc09ffff pref]: assigned
[    0.441364] pci 0000:00:14.2: ROM [mem 0xfc0a0000-0xfc0affff pref]: assigned
[    0.441377] pci 0000:00:14.4: ROM [mem 0xfc0b0000-0xfc0bffff pref]: assigned
[    0.441389] pci 0000:00:14.5: ROM [mem 0xfc0c0000-0xfc0cffff pref]: assigned
[    0.441402] pci 0000:00:14.6: ROM [mem 0xfc0d0000-0xfc0dffff pref]: assigned
[    0.441414] pci 0000:00:14.7: ROM [mem 0xfc0e0000-0xfc0effff pref]: assigned
[    0.441426] pci 0000:00:14.3: ROM [mem 0xfc0f0000-0xfc0f0fff pref]: assigned
[    0.441443] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.441454] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
[    0.441537] pci 0000:00:01.1: D0 power state depends on 0000:00:01.0
[    0.441556] pci 0000:00:02.0: CLS mismatch (64 != 512), using 64 bytes
[    0.441737] pci 0000:00:00.0: Adding to iommu group 0
[    0.441859] pci 0000:00:14.0: Adding to iommu group 1
[    0.441896] pci 0000:00:14.1: Adding to iommu group 1
[    0.441909] Trying to unpack rootfs image as initramfs...
[    0.441932] pci 0000:00:14.2: Adding to iommu group 1
[    0.441968] pci 0000:00:14.3: Adding to iommu group 1
[    0.442003] pci 0000:00:14.4: Adding to iommu group 1
[    0.442042] pci 0000:00:14.5: Adding to iommu group 1
[    0.442077] pci 0000:00:14.6: Adding to iommu group 1
[    0.442112] pci 0000:00:14.7: Adding to iommu group 1
[    0.442196] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
[    0.442217] AMD-Vi: Extended features (0x840, 0x0): IA
[    0.442233] AMD-Vi: Interrupt remapping enabled
[    0.442436] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.442446] software IO TLB: mapped [mem 0x000000007afe8000-0x000000007efe8000] (64MB)
[    0.442557] LVT offset 0 assigned for vector 0x400
[    0.445288] perf: AMD IBS detected (0x000000ff)
[    0.445344] kvm_amd: TSC scaling supported
[    0.445353] kvm_amd: Nested Virtualization enabled
[    0.445359] kvm_amd: Nested Paging enabled
[    0.445367] kvm_amd: LBR virtualization supported
[    0.475004] platform rtc_cmos: registered platform RTC device (no PNP device found)
[    0.478427] Initialise system trusted keyrings
[    0.478569] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    0.479010] ntfs3: Warning: Activated 64 bits per cluster. Windows does not support this
[    0.479112] fuse: init (API version 7.43)
[    0.515889] NET: Registered PF_ALG protocol family
[    0.515926] xor: automatically using best checksumming function   avx       
[    0.515939] Key type asymmetric registered
[    0.515947] Asymmetric key parser 'x509' registered
[    0.516022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.516035] io scheduler mq-deadline registered
[    0.516043] io scheduler kyber registered
[    0.547245] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.548166] Non-volatile memory driver v1.3
[    0.548194] Linux agpgart interface v0.103
[    0.548652] [drm] amdgpu kernel modesetting enabled.
[    0.550166] brd: module loaded
[    0.552737] loop: module loaded
[    0.552774] i2c-core: driver [at24] registered
[    0.552975] aeolia_pcie 0000:00:14.4: apcie_probe()
[    0.553025] aeolia_pcie 0000:00:14.4: apcie glue probe
[    0.553042] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 88811120:42417196:01000200
[    0.553062] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain
[    0.553074] aeolia_pcie 0000:00:14.4: devid = 164
[    0.553085] AMD-Vi: Remapping Selected: a4
[    0.553103] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23) (1024)
[    0.553535] apcie_msi_init((____ptrval____), (____ptrval____), 1, 0x400, (____ptrval____))
[    0.553552] apcie_msi_init((____ptrval____), (____ptrval____), 2, 0x401, (____ptrval____))
[    0.553565] apcie_msi_init((____ptrval____), (____ptrval____), 3, 0x402, (____ptrval____))
[    0.553576] apcie_msi_init((____ptrval____), (____ptrval____), 4, 0x403, (____ptrval____))
[    0.553588] apcie_msi_init((____ptrval____), (____ptrval____), 5, 0x404, (____ptrval____))
[    0.553599] apcie_msi_init((____ptrval____), (____ptrval____), 6, 0x405, (____ptrval____))
[    0.553610] apcie_msi_init((____ptrval____), (____ptrval____), 7, 0x406, (____ptrval____))
[    0.553622] apcie_msi_init((____ptrval____), (____ptrval____), 8, 0x407, (____ptrval____))
[    0.553633] apcie_msi_init((____ptrval____), (____ptrval____), 9, 0x408, (____ptrval____))
[    0.553644] apcie_msi_init((____ptrval____), (____ptrval____), 10, 0x409, (____ptrval____))
[    0.553655] apcie_msi_init((____ptrval____), (____ptrval____), 11, 0x40a, (____ptrval____))
[    0.553667] apcie_msi_init((____ptrval____), (____ptrval____), 12, 0x40b, (____ptrval____))
[    0.553678] apcie_msi_init((____ptrval____), (____ptrval____), 13, 0x40c, (____ptrval____))
[    0.553689] apcie_msi_init((____ptrval____), (____ptrval____), 14, 0x40d, (____ptrval____))
[    0.553700] apcie_msi_init((____ptrval____), (____ptrval____), 15, 0x40e, (____ptrval____))
[    0.553711] apcie_msi_init((____ptrval____), (____ptrval____), 16, 0x40f, (____ptrval____))
[    0.553722] apcie_msi_init((____ptrval____), (____ptrval____), 17, 0x410, (____ptrval____))
[    0.553733] apcie_msi_init((____ptrval____), (____ptrval____), 18, 0x411, (____ptrval____))
[    0.553744] apcie_msi_init((____ptrval____), (____ptrval____), 19, 0x412, (____ptrval____))
[    0.553755] apcie_msi_init((____ptrval____), (____ptrval____), 20, 0x413, (____ptrval____))
[    0.553765] apcie_msi_init((____ptrval____), (____ptrval____), 21, 0x414, (____ptrval____))
[    0.553776] apcie_msi_init((____ptrval____), (____ptrval____), 22, 0x415, (____ptrval____))
[    0.553787] apcie_msi_init((____ptrval____), (____ptrval____), 23, 0x416, (____ptrval____))
[    0.553817] aeolia_pcie 0000:00:14.4: irq_domain_alloc_irqs = 1
[    0.553826] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23
[    0.553835] aeolia_pcie 0000:00:14.4: dev->irq=1
[    0.553863] apcie_irq_msi_compose_msg
[    0.553872] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 (____ptrval____)
[    0.553887] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3)
[    0.553901] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    0.553913] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c841c, b7ffff40)
[    0.553924] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84bc, fee00000)
[    0.553936] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84dc, 00000000)
[    0.553947] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c849c, 00000000)
[    0.553958] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c854c, 00000003)
[    0.554023] i2c i2c-0: adapter [icc] registered
[    0.568930] Turn ON BT/WLAN: ret=20, reply 00 00 00 00
[    0.569034] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0
[    0.613942] ret=46, reply 00 00 02 00 00 00 1f 00
[    0.623911] ret=20, reply 00 00 01 02 10 00 00 00
[    0.628903] ret=20, reply 00 00 00 00 00 00 00 00
[    0.629080] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    0.629092] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    0.629623] sky2: driver version 1.30
[    0.629692] sky2 0000:00:14.1: chip type 0xbd
[    0.629718] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1
[    0.629782] sky2 0000:00:14.1: apcie_assign_irqs(1) (256)
[    0.629844] apcie_msi_init((____ptrval____), (____ptrval____), 24, 0x100, (____ptrval____))
[    0.629864] sky2 0000:00:14.1: irq_domain_alloc_irqs = 18
[    0.629873] sky2 0000:00:14.1: apcie_assign_irqs returning 1
[    0.629893] apcie_irq_msi_compose_msg
[    0.629902] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 (____ptrval____)
[    0.629917] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
[    0.629931] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    0.629942] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8410, b7ffff10)
[    0.629954] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b0, fee00000)
[    0.629965] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d0, 00000000)
[    0.629976] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8490, 00000000)
[    0.629987] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8510, 00000017)
[    0.630382] sky2 0000:00:14.1 eth0: addr <redacted>
[    0.630607] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3) (1792)
[    0.630682] apcie_msi_init((____ptrval____), (____ptrval____), 25, 0x700, (____ptrval____))
[    0.630698] apcie_msi_init((____ptrval____), (____ptrval____), 26, 0x701, (____ptrval____))
[    0.630710] apcie_msi_init((____ptrval____), (____ptrval____), 27, 0x702, (____ptrval____))
[    0.630725] xhci_aeolia 0000:00:14.7: irq_domain_alloc_irqs = 19
[    0.630735] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3
[    0.630745] xhci_aeolia 0000:00:14.7: version 3.0
[    0.630761] xhci_aeolia 0000:00:14.7: Belize SATA PHY init
[    0.649004] Freeing initrd memory: 6896K
[    1.630808] xhci_aeolia 0000:00:14.7: Belize SATA PHY Trace length : 6
[    2.630918] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16f938a41c6, max_idle_ns: 440795227558 ns
[    2.630991] clocksource: Switched to clocksource tsc
[    2.631034] xhci_aeolia 0000:00:14.7: AHCI vers 0001.0300, 32 command slots, 3 Gbps, ATA mode
[    2.631053] xhci_aeolia 0000:00:14.7: 1/1 ports implemented (port mask 0x1)
[    2.631065] xhci_aeolia 0000:00:14.7: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    2.631165] apcie_irq_msi_compose_msg
[    2.631176] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000019) mask=0x2 irq=26 hwirq=0x701 (____ptrval____)
[    2.631193] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 1, addr fee00000 data: 0x00000019 (25)
[    2.631207] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    2.631220] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70)
[    2.631232] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000)
[    2.631243] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000)
[    2.631254] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000)
[    2.631266] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c4, 00000019)
[    2.631711] scsi host0: ahci
[    2.631834] ata1: SATA max UDMA/133 abar m2097152@0xdc200000 port 0xdc200100 irq 26 lpm-pol 0
[    2.631853] xhci_aeolia_probe_one 0, controller is 90cf
[    2.631898] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.631918] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1
[    2.632028] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x0004000000010010
[    2.632050] apcie_irq_msi_compose_msg
[    2.632057] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 (____ptrval____)
[    2.632072] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24)
[    2.632086] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    2.632097] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70)
[    2.632109] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000)
[    2.632120] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000)
[    2.632131] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000)
[    2.632142] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c0, 00000018)
[    2.632169] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000
[    2.632214] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.632226] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2
[    2.632240] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed
[    2.632358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    2.632373] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.632383] usb usb1: Product: xHCI Host Controller
[    2.632391] usb usb1: Manufacturer: Linux 6.15.4 xhci-hcd
[    2.632400] usb usb1: SerialNumber: 0000:00:14.7
[    2.632702] hub 1-0:1.0: USB hub found
[    2.632731] hub 1-0:1.0: 2 ports detected
[    2.632943] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.633037] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    2.633051] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.633061] usb usb2: Product: xHCI Host Controller
[    2.633069] usb usb2: Manufacturer: Linux 6.15.4 xhci-hcd
[    2.633078] usb usb2: SerialNumber: 0000:00:14.7
[    2.633317] hub 2-0:1.0: USB hub found
[    2.633345] hub 2-0:1.0: 2 ports detected
[    2.634041] xhci_aeolia_probe_one 2, controller is 90cf
[    2.634066] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.634079] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3
[    2.634168] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x0004000000010010
[    2.634202] apcie_irq_msi_compose_msg
[    2.634210] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 (____ptrval____)
[    2.634225] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26)
[    2.634238] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    2.634249] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8428, b7ffff70)
[    2.634260] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84c8, fee00000)
[    2.634271] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84e8, 00000000)
[    2.634282] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84a8, 00000000)
[    2.634293] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c85c8, 0000001a)
[    2.634323] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000
[    2.634354] xhci_aeolia 0000:00:14.7: xHCI Host Controller
[    2.634366] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4
[    2.634378] xhci_aeolia 0000:00:14.7: Host supports USB 3.0 SuperSpeed
[    2.634480] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.15
[    2.634494] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.634504] usb usb3: Product: xHCI Host Controller
[    2.634511] usb usb3: Manufacturer: Linux 6.15.4 xhci-hcd
[    2.634520] usb usb3: SerialNumber: 0000:00:14.7
[    2.634751] hub 3-0:1.0: USB hub found
[    2.634778] hub 3-0:1.0: 1 port detected
[    2.634948] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    2.635031] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.15
[    2.635044] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.635054] usb usb4: Product: xHCI Host Controller
[    2.635062] usb usb4: Manufacturer: Linux 6.15.4 xhci-hcd
[    2.635070] usb usb4: SerialNumber: 0000:00:14.7
[    2.635295] hub 4-0:1.0: USB hub found
[    2.635322] hub 4-0:1.0: 1 port detected
[    2.635667] usbcore: registered new interface driver uas
[    2.635728] usbcore: registered new interface driver usb-storage
[    2.635792] i8042: PNP: No PS/2 controller found.
[    2.635984] mousedev: PS/2 mouse device common for all mice
[    2.636150] usbcore: registered new interface driver xpad
[    2.636245] i2c_dev: i2c /dev entries driver
[    2.636339] i2c_dev: adapter [icc] registered as minor 0
[    2.636363] i2c-core: driver [i2c-slave-eeprom] registered
[    2.636692] device-mapper: ioctl: 4.49.0-ioctl (2025-01-17) initialised: dm-devel@lists.linux.dev
[    2.636867] amd_pstate: the _CPC object is not present in SBIOS or ACPI disabled
[    2.636881] sdhci: Secure Digital Host Controller Interface driver
[    2.636888] sdhci: Copyright(c) Pierre Ossman
[    2.636974] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0)
[    2.637038] hid: raw HID events driver (C) Jiri Kosina
[    2.637049] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1) (768)
[    2.637114] apcie_msi_init((____ptrval____), (____ptrval____), 28, 0x300, (____ptrval____))
[    2.637134] sdhci-pci 0000:00:14.3: irq_domain_alloc_irqs = 1c
[    2.637144] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1
[    2.637277] usbcore: registered new interface driver usbhid
[    2.637292] usbhid: USB HID core driver
[    2.637303] Driver 'wmi-bmof' was unable to register with bus_type 'wmi' because the bus was not initialized.
[    2.637465] apcie_irq_msi_compose_msg
[    2.637481] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 (____ptrval____)
[    2.637497] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27)
[    2.637511] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    2.637523] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8418, b7ffff30)
[    2.637534] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b8, fee00000)
[    2.637546] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d8, 00000000)
[    2.637557] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8498, 00000000)
[    2.637568] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8530, 0000001b)
[    2.637891] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq
[    2.637958] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA
[    2.638249] NET: Registered PF_INET6 protocol family
[    2.638939] Segment Routing with IPv6
[    2.638973] In-situ OAM (IOAM) with IPv6
[    2.639026] NET: Registered PF_PACKET protocol family
[    2.639106] Bluetooth: RFCOMM TTY layer initialized
[    2.639119] Bluetooth: RFCOMM socket layer initialized
[    2.639127] Bluetooth: RFCOMM ver 1.11
[    2.639137] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.639145] Bluetooth: BNEP filters: protocol multicast
[    2.639154] Bluetooth: BNEP socket layer initialized
[    2.639164] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    2.639174] Bluetooth: HIDP socket layer initialized
[    2.643086] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
[    2.643243] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
[    2.648454] microcode: Current revision: 0x07013005
[    2.648802] IPI shorthand broadcast: enabled
[    2.666275] sched_clock: Marking stable (2335006965, 331182434)->(2724946053, -58756654)
[    2.666603] registered taskstats version 1
[    2.666615] Loading compiled-in X.509 certificates
[    2.673336] Demotion targets for Node 0: null
[    2.674773] Btrfs loaded, zoned=no, fsverity=no
[    2.675262] amdgpu 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
[    2.675282] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9922 0x1002:0x9922 0x00).
[    2.675324] [drm] register mmio base: 0xE4800000
[    2.675332] [drm] register mmio size: 262144
[    2.675526] amdgpu 0000:00:01.0: amdgpu: detected ip block number 0 <cik_common>
[    2.675540] amdgpu 0000:00:01.0: amdgpu: detected ip block number 1 <gmc_v7_0>
[    2.675552] amdgpu 0000:00:01.0: amdgpu: detected ip block number 2 <cik_ih>
[    2.675562] amdgpu 0000:00:01.0: amdgpu: detected ip block number 3 <dce_v8_0>
[    2.675572] amdgpu 0000:00:01.0: amdgpu: detected ip block number 4 <gfx_v7_0>
[    2.675583] amdgpu 0000:00:01.0: amdgpu: detected ip block number 5 <cik_sdma>
[    2.675618] ACPI Error: AE_BAD_PARAMETER, Thread 2157328896 could not acquire Mutex [ACPI_MTX_Tables] (0x2) (20240827/utmutex-252)
[    2.675638] ACPI Error: Mutex [ACPI_MTX_Tables] (0x2) is not acquired, cannot release (20240827/utmutex-289)
[    2.711648] amdgpu 0000:00:01.0: amdgpu: Fetched VBIOS from ROM BAR
[    2.711662] amdgpu: ATOM BIOS: 113-Starsha-005
[    2.711823] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[    2.711838] amdgpu 0000:00:01.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
[    2.712028] i2c_dev: adapter [AMDGPU i2c bit bus 0x90] registered as minor 1
[    2.712044] i2c i2c-1: adapter [AMDGPU i2c bit bus 0x90] registered
[    2.712160] i2c_dev: adapter [AMDGPU i2c bit bus 0x91] registered as minor 2
[    2.712172] i2c i2c-2: adapter [AMDGPU i2c bit bus 0x91] registered
[    2.712267] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    2.712286] amdgpu 0000:00:01.0: amdgpu: VRAM: 2048M 0x0000000F00000000 - 0x0000000F7FFFFFFF (2048M used)
[    2.712300] amdgpu 0000:00:01.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    2.712320] [drm] Detected VRAM RAM=2048M, BAR=2048M
[    2.712328] [drm] RAM width 64bits UNKNOWN
[    2.712534] [drm] amdgpu: 2048M of VRAM memory ready
[    2.712545] [drm] amdgpu: 2670M of GTT memory ready.
[    2.712587] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    2.712604] amdgpu 0000:00:01.0: amdgpu: Done gart
[    2.712626] amdgpu 0000:00:01.0: amdgpu: Done init
[    2.712660] [drm] PCIE GART of 512M enabled (table at 0x0000000F00100000).
[    2.713587] [drm] AMDGPU Display Connectors
[    2.713611] [drm] Connector 0:
[    2.713617] [drm]   HDMI-A-1
[    2.713623] [drm]   HPD1
[    2.713629] [drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[    2.713640] [drm]   Encoders:
[    2.713646] [drm]     DFP1: INTERNAL_UNIPHY
[    2.719855] amdgpu 0000:00:01.0: amdgpu: SE 2, SH per SE 1, CU per SH 9, active_cu_number 18
[    2.720001] amdgpu 0000:00:01.0: amdgpu: Runtime PM not available
[    2.720408] i2c_dev: adapter [card0-HDMI-A-1] registered as minor 3
[    2.720424] i2c i2c-3: adapter [card0-HDMI-A-1] registered
[    2.720439] [drm] Initialized amdgpu 3.63.0 for 0000:00:01.0 on minor 0
[    2.733454] mmc0: new UHS-I speed SDR104 SDIO card at address 0001
[    2.734467] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
[    2.754028] amdgpu: ps4_bridge_get_modes
[    2.757282] fbcon: amdgpudrmfb (fb0) is primary device
[    2.783272] usb usb3-port1: over-current condition
[    2.783962] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery tried 5 times
[    2.783975] [drm:amdgpu_atombios_dp_link_train] *ERROR* clock recovery failed
[    2.954348] usb usb4-port1: over-current condition
[    3.090321] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    3.091169] ata1.00: ATA-8: HGST HTS545050A7E680, GR2OA3E0, max UDMA/133
[    3.091467] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    3.092509] ata1.00: configured for UDMA/133
[    3.092824] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS545050A7 A3E0 PQ: 0 ANSI: 5
[    3.093585] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.093743] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.093756] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.093784] sd 0:0:0:0: [sda] Write Protect is off
[    3.093790] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.093833] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.093913] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    3.454210] random: crng init done
[    3.688447] mwifiex_sdio mmc0:0001:1: info: FW download over, size 609492 bytes
[    3.721249] Console: switching to colour frame buffer device 240x67
[    3.730474] amdgpu 0000:00:01.0: [drm] fb0: amdgpudrmfb frame buffer device
[    3.732339] ahci 0000:00:14.2: version 3.0
[    3.732417] ahci 0000:00:14.2: apcie_assign_irqs(1) (512)
[    3.732507] apcie_msi_init(00000000cef052a1, 0000000047947228, 31, 0x200, 0000000021d0a060)
[    3.732565] ahci 0000:00:14.2: irq_domain_alloc_irqs = 1f
[    3.732593] ahci 0000:00:14.2: apcie_assign_irqs returning 1
[    3.732628] ahci 0000:00:14.2: DMA bits = 31
[    3.732652] ahci 0000:00:14.2: DMA enable
[    3.732688] ahci 0000:00:14.2: AHCI vers 0001.0300, 32 command slots, 3 Gbps, unknown mode
[    3.732725] ahci 0000:00:14.2: 1/1 ports implemented (port mask 0x1)
[    3.732755] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs 
[    3.732846] apcie_irq_msi_compose_msg
[    3.732868] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001c) mask=0x1 irq=31 hwirq=0x200 000000004bd30b36
[    3.732914] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001c (28)
[    3.732956] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8408, ffffffff)
[    3.732993] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8414, b7ffff20)
[    3.733030] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84b4, fee00000)
[    3.733067] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c84d4, 00000000)
[    3.733104] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8494, 00000000)
[    3.733141] aeolia_pcie 0000:00:14.4: glue_write32 to offset, value (00400000, 001c8520, 0000001c)
[    3.733705] scsi host1: ahci
[    3.733834] ata2: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31 lpm-pol 0
[    3.734006] printk: legacy console [netcon0] enabled
[    3.734057] netconsole: network logging started
[    3.734311] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.737122] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.738897] amdgpu: ps4_bridge_get_modes
[    3.739207] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[    3.742398] clk: Disabling unused clocks
[    3.744094] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.744573] ALSA device list:
[    3.745543] cfg80211: failed to load regulatory.db
[    3.747666]   #0: HD-Audio Generic at 0xe4840000 irq 29
[    4.106503] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[    4.110309] btmrvl_sdio mmc0:0001:2: sdio device tree data not available
[    4.171505] mwifiex_sdio mmc0:0001:1: host_mlme: disable, key_api: 2
[    4.179045] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
[    4.180571] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during	initialization
[    4.194288] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    4.197984] ata2.00: ATAPI: SONY    PS-SYSTEM   408R, 3100, max UDMA/66
[    4.202023] ata2.00: configured for UDMA/66
[    4.252951] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.130.11.p15) 
[    4.254515] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.130.11.p15) 
[    4.423663]  sda: sda1 sda3 sda5 sda7 sda9 sda10 sda11 sda12 sda13 sda17 sda19 sda25 sda27 sda29 sda31
[    4.428781] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.432426] scsi 1:0:0:0: CD-ROM            SONY     PS-SYSTEM   408R 3100 PQ: 0 ANSI: 5
[    4.444433] sr 1:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
[    4.445974] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.456594] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.456738] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    4.461650] Freeing unused kernel image (initmem) memory: 1648K
[    4.463241] Write protecting the kernel read-only data: 30720k
[    4.466449] Freeing unused kernel image (text/rodata gap) memory: 1204K
[    4.468977] Freeing unused kernel image (rodata/data gap) memory: 1524K
[    4.470657] rodata_test: all tests were successful
[    4.472307] Run /init as init process

dmesg with kernel 5.15 (only excerpt of the relevant parts because otherwise the message exceeded the character count):

[    0.000000] ps4: x86_ps4_early_setup: PS4 early setup
[    0.000000] Linux version 5.15.15-obsidianx-1.0.0_release (root@3d2b6b37e061) (gcc-11 (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #8 SMP Fri Jul 25 07:41:11 UTC 2025
[    0.000000] Command line: initcall_blacklist=sony,hid_sony log_buf_len=100M panic=0 clocksource=tsc net.ifnames=0 console=tty0,tty1,tty2 drm.debug=0 iommu=pt vfio_iommu_type1.allow_unsafe_interrupts=1 consoleblank=0 video=HDMI-A-1:1920x1080
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
...
[    2.812280] mmc0: new ultra high speed SDR104 SDIO card at address 0001
[    2.812304] device: 'mmc0:0001': device_add
[    2.812321] bus: 'mmc': add device mmc0:0001
[    2.812340] bus: 'mmc': __driver_probe_device: matched device mmc0:0001 with driver mmcblk
[    2.812345] bus: 'mmc': really_probe: probing driver mmcblk with device mmc0:0001
[    2.812353] mmcblk: probe of mmc0:0001 rejects match -19
[    2.812364] device: 'mmc0:0001:1': device_add
[    2.812371] bus: 'sdio': add device mmc0:0001:1
[    2.812392] bus: 'sdio': __driver_probe_device: matched device mmc0:0001:1 with driver mwifiex_sdio
[    2.812397] bus: 'sdio': really_probe: probing driver mwifiex_sdio with device mmc0:0001:1
[    2.812677] i2c i2c-1: found normal entry for adapter 1, addr 0x51
[    2.813100] driver: 'mwifiex_sdio': driver_bound: bound to device 'mmc0:0001:1'
[    2.813119] bus: 'sdio': really_probe: bound device mmc0:0001:1 to driver mwifiex_sdio
[    2.813126] device: 'mmc0:0001:2': device_add
[    2.813134] bus: 'sdio': add device mmc0:0001:2
[    2.813156] bus: 'sdio': __driver_probe_device: matched device mmc0:0001:2 with driver btmrvl_sdio
[    2.813160] bus: 'sdio': really_probe: probing driver btmrvl_sdio with device mmc0:0001:2
[    2.813226] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
...
[    3.926069] mwifiex_sdio mmc0:0001:1: info: FW download over, size 717068 bytes
...
[    4.656978] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[    4.657336] btmrvl_sdio mmc0:0001:2: sdio device tree data not available
[    4.657540] device: 'hci0': device_add
[    4.657589] device: 'rfkill0': device_add
[    4.657650] driver: 'btmrvl_sdio': driver_bound: bound to device 'mmc0:0001:2'
[    4.657686] bus: 'sdio': really_probe: bound device mmc0:0001:2 to driver btmrvl_sdio
[    4.657697] device: 'mmc0:0001:3': device_add
[    4.657705] bus: 'sdio': add device mmc0:0001:3
[    4.732734] device: 'phy0': device_add
[    4.733298] device: 'rfkill1': device_add
[    4.740618] device: 'mlan0': device_add
[    4.741483] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p54) 
[    4.741580] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.68.19.p54) 
...

DaggaMaster

@Random-Kafk
Thanks for your hard work, i only signed up to let you and others know that i got it working on my PS4 Phat Belize / CUH-1216B.
I used the compiled V5.15.15 from your Github and WIFI and Bluetooth works. I can finally use my PS4 Controller in emulators and do Browsing, updates etc.

Tested it on 'Psxitarch v3 by PS3ITA' and could not connect my PS4 Controller, keeps connecting and disconnecting while pressing the PS Button, but WIFI worked perfectly.
Settled for Pop OS 22.04 by Noob404 because i'm more of an Ubuntu guy, and everything works perfectly.

Thanks @noob404 & Thanks Random-Kafk

My Setup:
(Europe) PS4 Phat 1TB - CUH-1216B
V12.00
Pop OS 22.04
5.15.15-obsidianx-2.9.0 -- BELIZE ‒ Blackscreen Fix, No Flicker

Random-Kafk

DaggaMaster Haha I'm glad it worked.
Also I should upload the links to the one with the blackscreen fix, since I was able to find it about a week ago. 🙂
Thanks for the reminder!

If it helped you I would appreciate if you could leave a star on Github :)

noob404

Random-Kafk Your feat is awesome. Thank you for your service! Really appreciated.

Random-Kafk

noob404 Thanks for the praise!

« Previous Page